FUEL ACTIVATOR — a device which is installed on a fuel hose of any Seat car and significantly reduces fuel consumption Seat by 20% and improves the engine performance.
Therefore, with the same amount of fuel on your Seat, you will drive MORE KILOMETERS!
Activators on SEAT fully pay off in 3-4 months!
The service life of Activators for SEAT is 10-15 years.
Activators are installed on all models of Seat and are used in all types of fuel — GAS, PETROL, DIESEL FUEL.
The Activators are easy to install, they are installed on the Seat fuel supply hose in a few minutes:
1. Seat fuel consumption is reduced by 20%.
2. A slight increase in the power of the Seat engine.
3. Extends the service life of the Seat engine.
4. The content of carbon monoxide and other pollutants in Seat exhaust gases is reduced by 30-40%.
5. Stable and dynamic operation of the Seat engine.
6. Reduces the formation of soot and carbon deposits on Seat pistons, cylinders, spark plugs, fuel injectors, catalyst and exhaust pipes.
7. Extends the service life of the Seat catalyst, lambda probe, spark plugs and Seat fuel injectors.
Seat ACTIVATOR reduces fuel consumption by 20%.
At the same time, the engine operation of Seat is significantly improved.
Examples of installation on different models of Seat.
ANY FUEL (petrol, diesel, gas), by going through 10 magnetic fields of THESE ACTIVATORS, for a short time changes its structure and properties, and it BURNS more fully and REGULARLY.
Due to this, the Seat engine begins to work much BETTER.
Usually, it is already seen after 10-20 km of run of the car Seat which has an installed Activator.
Imagine, how your AUDI engine works with VERY GOOD FUEL …
That is, we have quite different (better) fuel.
You agree that chopped firewood burns much better than whole logs … The same thing happens with automotive fuel in the cylinders of the Seat engine.
Activators installed on Seat reduce the density and viscosity of fuel:
1. This leads to the formation of smaller fuel particles, ensures good atomization and combustion in the cylinders of the Seat engine.
2. The fuel ignites better and burns smoothly, ensuring soft and smokeless operation of the Seat engine.
3. Reduces deposits on injectors and carbon deposits on candles and Seat cylinders.
4. Reduces the load on the operation of Seat fuel supply systems.
5. Increases reliability and increases the life of Seat fuel equipment.
All this leads to improved conditions for fuel combustion Seat cylinders.
FUEL with Activators burns more completely in the Seat engine, does not leave carbon deposits on pistons, cylinders and spark plugs.
On Seat cars, the injectors are not polluted, and there is no black smoke even at throttling at free running.
Knowing where the fuel hoses are located, Activators at Seat are installed within 5 minutes (see «INSTALLATION»)
ATTENTION! The main difference of THESE ACTIVATORS is that there are 20 magnets placed in them, which for a short time CHANGE THE STRUCTURE AND PROPERTIES OF FUEL. In other similar Aktivators which can be used on Seat, there are only 2 powerful magnets which are not able to change anything in the fuel (see «ANALOGUES» ).
When you don’t like the Aktivators, then with no doubt you can return them back within 37 days (read «RETURN»).
ACTIVATOR reduces the fuel consumption of any SEAT vehicle by 20%. Therefore, with the same amount of fuel on your Seat, you will drive MORE KILOMETERS!
The operating life is at least 15 years
We produce and sell them starting from 2008
PRICE:
The set of Activators (2 Activators) — 60,00 EUR
The price includes the deliver by post.
NOVELTY
When installing on Seat both the Fuel combustion Activators and Activator Autothermia, FUEL CONSUMPTION is reduced by 30-40%!
Read «ACTIVATOR OF AUTOTHERMIE»
PATENTS
The fuel consumption of SEAT cars depends on the model, engine and driving mode. Some models run on gasoline, diesel, or gas.
Examples of fuel consumption
SEAT Ibiza. Fuel consumption ranges from 3 to 12.9 liters/100 km. For example, for a 3rd generation hatchback with a 1.2 MT (54 hp) engine, the combined consumption is 5.9 liters/100 km (city — 7.8 liters/100 km, highway — 4.8 liters/100 km).
SEAT Leon. Fuel consumption is 1.4—12.0 liters/100 km. For example, for a 5th generation station wagon with a 1.0 MT (90 hp) engine, the combined consumption is 4.7 liters/100 km (city — 5.6 liters/100 km, highway — 4.2 liters/100 km).
SEAT Leon 2020 (1.5 Eco TSI ACT FR):
fuel consumption in the city is 6.5 liters/100 km;
fuel consumption on the highway is 4.5 liters/100 km;
fuel consumption in the combined cycle is 5.5 liters/100 km.
SEAT Altea 2020 (1.5 EcoTSI FR):
fuel consumption in the city is 6.8 liters/100 km;
fuel consumption on the highway is 5.0 liters/100 km;
fuel consumption in the combined cycle is 5.9 liters/100 km.
Thus, the SEAT Ateca consumes more fuel in the urban cycle, while the SEAT Leon consumes more fuel on the highway.
The SEAT Leon is available with different types of fuel: AI-95 gasoline, diesel fuel, natural gas, gas/gasoline, AI-98 gasoline. Fuel consumption per 100 km depends on the engine modification:
SEAT Leon 2013, station wagon, 3rd generation, 5F:
1.2 liters, 105 hp, gasoline, robot, front—wheel drive — 5.0 liters/100 km (AI-95 gasoline);
1.2 l, 86 hp, petrol, manual transmission, front—wheel drive — 5.2 l/100 km (petrol AI-95);
1.4 l, 140 hp, petrol, manual transmission, front—wheel drive — 5.3 l/100 km (petrol AI-95);
1.8 l, 160 hp, petrol, manual transmission, front—wheel drive — 6.8 l/100 km (petrol AI-95);
1.4 l, 85 hp, petrol, manual transmission, front—wheel drive — 6.9 l/100 km (petrol AI-95);
1.6 l, 102 hp, petrol, manual transmission, front—wheel drive — 7.4 l/100 km (petrol AI-95);
2.0 liters, 211 hp, gasoline, robot, front—wheel drive — 7.5 liters/100 km (AI-95 gasoline).
The SEAT Ateca is offered with four petrol and two diesel engines. One of the most economical in terms of fuel consumption is the 1.5—liter gasoline engine, which produces 150 hp. Fuel consumption is 5.88 liters / 100 km. The 2.0-liter gasoline engine with 190 hp demonstrates the highest consumption among all available engines.
There is also information about fuel consumption for the SEAT Cordoba MK1, depending on the engine volume and injection type.:
1,4 MONO — 8,8 l/city;
1.4 injector — 9.9 l/city;
1.6 MONO — 10.6 l/city;
1.6 injector — 10.9 l/city;
2.0 injector — 11 l/city;
1.8 injector — 11.5 l/city;
1.8 MONO — 13.3 l/city.
Optimizing the efficiency of a vehicle must start somewhere, and that must be with a well-maintained machine. If your car is in good condition, it will affect its fuel efficiency.
Aron’s Seat
Regular maintenance: Regular maintenance of your Seat is essential to ensure optimal fuel efficiency. During maintenance, a qualified technician will check and replace worn parts such as spark plugs and air filters, which can significantly affect fuel consumption.
Oil Change: Oil is the lifeblood of your engine, and choosing the right type of oil for your particular model is crucial. The recommended oil is listed in your vehicle’s operating manual and should be used at intervals recommended by the manufacturer. Using low-quality or low-quality oil can cause increased friction in the engine and reduce fuel efficiency.
Air Filter Replacement: A clogged air filter restricts air flow to the engine, forcing it to work harder and burn more fuel. We recommend replacing the air filter at least once a year or more often if you are driving in dusty conditions.
Tire pressure: Insufficiently inflated tires can significantly increase rolling resistance, resulting in increased fuel consumption. Check the tire pressure regularly and make sure it is raised to the level specified in the vehicle’s operating manual. We can offer tire pressure testing as part of your service.
Smooth acceleration: Sharp acceleration — high fuel consumption. Aim for a smooth and progressive acceleration from a standing position.
Maintaining constant speed: Irregular driving with constant acceleration and deceleration consumes more fuel. Try to anticipate traffic flow and maintain a constant cruising speed whenever possible.
Avoid idling: If you stand for more than a minute, turn off the engine. Modern engines quickly start up again, and when idling, unnecessary fuel is consumed.
Use high gears: Driving in a lower gear than necessary causes the engine to spin harder and burn more fuel. Try to use the maximum possible gear without straining the engine.
Anticipate traffic: By looking far ahead and anticipating traffic flow, you can avoid unnecessary braking and acceleration, which can significantly improve fuel economy.
Vehicle maintenance
Reduce weight: The more weight your car carries, the harder the engine must run and the more fuel it consumes. Remove all unnecessary items from the trunk and avoid overloading the car.
Air Conditioning: Although air conditioning may be convenient on hot days, it consumes additional engine power and can reduce fuel efficiency by up to 10%. Use the air conditioner only when necessary and try to open the windows for fresh air on cooler days.
Plan your trips: Try to keep your errands to a single trip to avoid multiple short trips. During short trips, the engine does not reach operating temperature, which can reduce fuel efficiency.
Remove the roof racks and bike racks: When you are not using them, remove the roof racks and bike racks, as they can increase wind resistance and slightly reduce fuel consumption.
Additional tips
SEAT Ibiza Engine
Fuel selection: Although premium fuels may provide small performance benefits, they will not necessarily lead to increased fuel consumption. In most cases, using the standard fuel recommended by the manufacturer is sufficient.
Fuel Economy Applications: There are a number of smartphone apps that can help you track fuel consumption and identify areas for improvement.
Eco-driving Courses: Consider taking an eco-driving course to learn professional methods for improving fuel efficiency.
By following these tips and making small changes to your driving habits, you can significantly improve the fuel efficiency of your seat and save on fuel costs.
However, several additional factors must be considered to achieve optimal performance and long-term fuel efficiency.:
Advanced maintenance and Maintenance:
Fuel Pump
Cleaning fuel injectors: Dirty fuel injectors can lead to uneven fuel supply and lower fuel consumption. It recommends cleaning the fuel injectors regularly, especially if you experience a decrease in fuel efficiency or fluctuations during acceleration.
Spark plug replacement: Spark plugs ignite the fuel-air mixture in the engine cylinders. Worn spark plugs can cause incomplete combustion, resulting in fuel loss and reduced performance. Recommended spark plug replacement intervals are listed in your vehicle’s owner’s manual.
Turbocharger maintenance: In many SEAT models, turbochargers are used to improve engine performance. A faulty or malfunctioning turbocharger can significantly reduce fuel efficiency.
Fuel System Inspection: A comprehensive inspection of the fuel system can reveal leaks, blockages, and other problems that may affect fuel efficiency.
Keep your seat in perfect condition:
Wheel Alignment: Misaligned wheels can cause your car to slide sideways and increase rolling resistance, which reduces fuel efficiency. We recommend changing the wheels regularly to ensure that your tires wear evenly and that your car has the right track.
Tire Quality: Not all tires are created equal. Choose tires with a good rolling resistance value to reduce fuel consumption.
Battery condition: A low battery may put additional strain on the alternator, which may reduce fuel efficiency. Make sure your battery is in good condition and replace it if necessary.
Plan your route: Planning your route using a navigation or mapping application before departure will help you avoid traffic jams and choose the most economical route.
Use car-sharing or public transportation services: Consider using car-sharing services with colleagues or using public transportation for short distances. This can significantly reduce fuel consumption.