MITSUBISHI FUEL ACTIVATOR — a device which is installed on a fuel hose of any Mitsubishi car and significantly reduces fuel consumption Mitsubishi by 20% and improves the engine performance. Therefore, with the same amount of fuel on your Mitsubishi, you will drive MORE KILOMETERS!
Activators are installed on all models of Mitsubishi and are used in all types of fuel — GAS, PETROL, DIESEL FUEL.
The Activators are easy to install, they are installed on the Mitsubishi fuel supply hose in a few minutes:
1. Mitsubishi fuel consumption is reduced by 20%.
2. A slight increase in the power of the Mitsubishi engine.
3. Extends the service life of the Mitsubishi engine.
4. The content of carbon monoxide and other pollutants in Mitsubishi exhaust gases is reduced by 30-40%.
5. Stable and dynamic operation of the Mitsubishi engine.
6. Reduces the formation of soot and carbon deposits on Mitsubishi pistons, cylinders, spark plugs, fuel injectors, catalyst and exhaust pipes.
7. Extends the service life of the Mitsubishi catalyst, lambda probe, spark plugs and Mitsubishi fuel injectors.
Mitsubishi ACTIVATOR reduces fuel consumption by 20%.
At the same time, the engine operation of Mitsubishi is significantly improved.
Examples of installation on different models of Mitsubishi.
Click on the photos, to enlarge
ANY FUEL (petrol, diesel, gas), by going through 10 magnetic fields of THESE ACTIVATORS, for a short time changes its structure and properties, and it BURNS more fully and REGULARLY.
Due to this, the Mitsubishi engine begins to work much BETTER.
Usually, it is already seen after 10-20 km of run of the car Mitsubishi which has an installed Activator.
Imagine, how your Mitsubishi engine works with VERY GOOD FUEL
That is, we have quite different (better) fuel.
You agree that chopped firewood burns much better than whole logs … The same thing happens with automotive fuel in the cylinders of the Mitsubishi engine.
Activators installed on Mitsubishi reduce the density and viscosity of fuel:
1. This leads to the formation of smaller fuel particles, ensures good atomization and combustion in the cylinders of the Mitsubishi engine.
2. The fuel ignites better and burns smoothly, ensuring soft and smokeless operation of the Mitsubishi engine.
3. Reduces deposits on injectors and carbon deposits on candles and Mitsubishi cylinders.
4. Reduces the load on the operation of Mitsubishi fuel supply systems.
5. Increases reliability and increases the life of Mitsubishi fuel equipment.
All this leads to improved conditions for fuel combustion Mitsubishi cylinders.
FUEL with Activators burns more completely in the Mitsubishi engine, does not leave carbon deposits on pistons, cylinders and spark plugs.
On Mitsubishi cars, the injectors are not polluted, and there is no black smoke even at throttling at free running.
Knowing where the fuel hoses are located, Activators at Mitsubishi are installed within 5 minutes (see «INSTALLATION»)
ATTENTION! The main difference of THESE ACTIVATORS is that there are 20 magnets placed in them, which for a short time CHANGE THE STRUCTURE AND PROPERTIES OF FUEL. In other similar Aktivators which can be used on Mitsubishi, there are only 2 powerful magnets which are not able to change anything in the fuel (see «ANALOGUES» ).
When you don’t like the Aktivators, then with no doubt you can return them back within 37 days (read «RETURN»).
ACTIVATOR reduces the fuel consumption of any MITSUBISHI vehicle by 20%. Therefore, with the same amount of fuel on your Mitsubishi, you will drive MORE KILOMETERS!
The operating life is at least 15 years
We produce and sell them starting from 2008
The set of Activators (2 Activators) — 60,00 EUR
The price includes the deliver by post.
When installing on Mitsubishi both the Fuel combustion Activators and Activator Autothermia, FUEL CONSUMPTION is reduced by 30-40%!
Read «ACTIVATOR OF AUTOTHERMIE»
(click on the image, to enlarge it)
Mitsubishi. Repair features and MAINTENANCE
Mitsubishi. Features of operation
Japanese cars for a decade confidently kept in the top of the most popular brands. Among them, the recognized leaders, without a doubt, are the cars of Mitsubishi Motors.
High reliability of components and assemblies, powerful and economical engine, modern design, comfortable interior. Here, perhaps, the main advantages of Mitsubishi (Mitsubishi, Mitsubishi), which were appreciated by Russian motorists.
That is why car owners who are interested in their Mitsubishi worked properly and reliably, regularly undergo car maintenance in the service station .
However, this approach is not only true for Mitsubishi. Any car, if you regularly carry out diagnostics, service and MAINTENANCE at the service station, will serve without major repairs for a long time.
Mitsubishi. Maintenance service
Maintenance of the Mitsubishi vehicle in the service station is recommended every 15,000 km or every six months.
The list of routine maintenance recommended by the manufacturer when passing MAINTENANCE, usually varies depending on the specific model, year of manufacture and configuration of the car (for example, by type of gearbox, engine, etc.).
The following operations are universal for all Mitsubishi models:
* Mitsubishi oil and filter replacement;
* Mitsubishi brake system diagnostics;
* Mitsubishi engine and suspension diagnostics;
* Mitsubishi steering check;
* Mitsubishi electrical equipment inspection.
Some car owners unreasonably consider that Mitsubishi an extra waste of money.
Of course, this is a wrong point of view. And, as for any mistake, the car owner has to pay for neglect of maintenance, and pay much more than for a comprehensive MAINTENANCE.
Practice shows that the scheduled works provided by the manufacturing company allow:
* Significantly extend the life of Mitsubishi;
* To reduce the risk of an accident Mitsubishi;
* Reduce Mitsubishi operating costs.
Mitsubishi. Advantages of timely MAINTENANCE in the service station
Regular complex MAINTENANCE of Mitsubishi at the service station allows timely detection and elimination of the slightest faults. Moreover, an experienced master knows all the «weaknesses» of each model and can identify problems at the earliest stages of their occurrence.
After adjustment and calibration of various systems, elimination of minor faults and replacement of worn parts, the car will be able to safely pass another 15 thousand km until the next MAINTENANCE – without extraordinary repair. At the same time, dozens of times reduced the possibility of an accident or accident due to failure or failure of any node.
In addition, it will also be possible to avoid overspending of fuel, oil or other technical liquids, increased wear of tires, etc.
At the same time, maintenance of Mitsubishi will be much cheaper than repair or replacement of the unit or unit.
Diagnosis and repair of Mitsubishi engine
Mitsubishi cars are equipped with a fairly simple, but at the same time-rich complex electronics motor system. This should be remembered when choosing a car service to perform maintenance and repair.
If your» Japanese » needed repair, do not apply «in the garage» to familiar craftsmen. Not having modern equipment and sufficient experience in the maintenance of machines of this brand, well versed in the «Lada» or «Gazelle» mechanic Vasya can cheat such that in the end, Mitsubishi will have to completely change all the electronic filling. And it is not difficult to guess, » will cost a pretty penny.»
Therefore, it is better not to save on maintenance and repair of such a responsible – motor system, and immediately contact a professional car service . You will be sure of the quality and reliability of the work performed, and if something turns out to be wrong-you can always demand a free warranty repair .
Among the characteristic features of maintenance Mitsubishi can be noted regular cleaning of the injector-it depends on the stable and smooth operation of the motor. It is also necessary to change worn plastic parts (e.g. pump drive belt rollers, pump rollers) in a timely manner.
Every 60 thousand km it is recommended to change the timing belt (timing). This will prevent the possibility of a sudden breakage of the worn belt.
Please note that the mileage of 60 thousand km is determined for the original product. If you choose or you slip counterfeit belt (as often happens in different garage «service stations»), it can break at any time. This is another plus in favor of professional service stations and service STATIONS, where you are guaranteed to offer a choice of branded spare parts or quality analogues.
Mitsubishi. Replacement of oil, spark plugs, consumables
It is well known that Japanese cars are reliable and hardy. But few of the drivers think that this statement is true only with proper care for the car.
It should be noted that proper care involves the use of those oils, technical liquids, batteries, spark plugs, filters, belts and other components and consumables that fully comply with the standards of Mitsubishi Motors.
Mitsubishi is very sensitive to the quality of consumables. The use of non-original or counterfeit oils and other technical fluids can lead to serious problems such as engine valve burnout, slagging of the powertrain and gearbox.
Poor-quality fuel can quickly lead to failure of the fuel system sensors and clogging of the injectors. The consequence of this may be the failure of the ignition system and the fuel system.
The use of the first available (usually – the cheapest) spark plugs often leads to wiring faults, burnouts and short circuits.
As you can see, saving on consumables and THEN, the car owner will be forced in the near future an order of magnitude more money to spend on repairs.
Mitsubishi. Gear box
Most modern Mitsubishi vehicles are equipped with an automatic transmission (automatic transmission). In order that it could serve long enough and reliably, it is necessary to change oil in due time – as it was noted above, using only the brands of oils recommended by the car manufacturer.
Mitsubishi. Suspension repair
The front suspension struts are one of the few weak points of Mitsubishi. Especially when the car is operated on Russian roads. It should pay attention each time.
It is also quite common to require replacement of wheel bearings.
Mitsubishi. Body protection
Mitsubishi is equipped with a reliable, strong body, which is quite weakly susceptible to corrosion. However, the weather conditions typical for our country, coupled with a rather weak paint coating, can lead to corrosion.
Therefore, at the first sign of a violation of the body cover, it is desirable to contact the service STATION, which has the necessary painting equipment. Better-if it is a full-fledged painting and drying chamber.
It also makes sense to produce anti-corrosion and anti-gravel treatment. Still, initially Mitsubishi-for all its reliability and strength – is not designed for Russian roads.
Diagnosis of Mitsubishi cars should be carried out on modern computer equipment.
This will allow you to identify all possible problems and problems at the earliest stages of occurrence and, accordingly, promptly take measures to eliminate them.Mitsubishi is one of the car brands that requires highly qualified maintenance and repair. This is based on the fact that the latest models are equipped with modern devices. All complex operations on repair of Mitsubishi are carried out only on the special equipment which is in car service. The car is not older than 4-5 years to repair almost do not need. The main thing in time to pass maintenance and the machine will work perfectly.Repair engine Mitsubishi necessary, using original spare parts, as the injection system has specific features. Time required to do cleaning of injector of Mitsubishi in order to avoid any disruption during operation of the motor. Mitsubishi diesel engines in the repair also require a large number of operations, such as replacement of bushings, crack removal, boring, honing cylinders that retain a special oil film on the cylinder walls.
Sometimes, when repairing Mitsubishi engine, it is necessary to replace the timing belt, which in the process of operation of the car wears out and breaks. It is recommended to replace the belt every 60 thousand km. Specialists producing repair Mitsubishi recommend to regularly make diagnosis and identify problems in the car, because time is not eliminated faults can lead to more serious consequences.In this regard, it is periodically required to repair the automatic transmission Mitsubishi, even given the fact that it has durability. The cause of failure of the automatic transmission can be sliding bearings. To avoid this, the gearbox must be filled with high-grade oil. Also, when repairing the automatic transmission, it is necessary to replace the oil filter, as the factory manufacturer installs disposable filters.
How else can you reduce Mitsubishi fuel consumption
Open windows or a sunroof have a negligible effect on Mitsubishi fuel consumption at low speeds. At high speeds, Mitsubishi’s fuel consumption will increase by 0.2-0.5 liters
Head lighting and fog lights will increase Mitsubishi’s fuel consumption by about 0.3 liters, so do not turn on powerful electricity consumers unnecessarily.
You need to learn how to do little: save Mitsubishi fuel with all your might and means.
Believe me, you already have everything you need to reduce Mitsubishi fuel consumption by a third (!). Don’t you believe it?
1) Anything that interferes with aerodynamics increases Mitsubishi’s fuel consumption.
This is a wide-profile rubber, not provided by the manufacturer: decorative spoilers, «muzzles» with ears on the hood, and other trinkets. Mitsubishi’s fuel consumption is also increased by trunks — even streamlined boxes, not to mention traditional metal trusses, even if empty. In a word, everything is superfluous!
2) Constantly switched on electricity consumers increase Mitsubishi fuel consumption.
Hence the conclusion: turn it on only as needed. Condishn, for example, will cost an additional 0.8 liters of Mitsubishi fuel for every 100 km. Naturally, this rule does not apply to those regions where you need to drive with low beam even during the day.
3) Warming up the motor to operating temperature after cold start increases Mitsubishi fuel consumption.
Get moving as soon as possible. Under load, the engine warms up much faster than at idle, and the neighbors will not take revenge with punctured tires for the morning roar and fumes.
4) The sudden start of movement increases Mitsubishi’s fuel consumption.
Get moving without stepping on the accelerator pedal to the point of failure, switch to the next gear as early as possible. If possible, try to drive in the highest gear — modern engines, especially diesel engines, allow you to switch to the fourth already at 50 km / h.
5) The engine must run at a speed corresponding to the maximum torque — this reduces Mitsubishi fuel consumption.
To do this, you do not need to raise the design documentation and make requests to the manufacturer, just look at the accompanying documents of the car. It looks like this: maximum torque (xxx Nm / xxx rpm). (For Mitsubishi, the maximum torque is at 3000 rpm, while the speed of the car is 90 km /h.)
6) Proportionate and prudent movement saves Mitsubishi fuel consumption.
Calculate the traffic situation, avoid unnecessary acceleration and full throttle movement, remove your foot from the gas pedal in advance before the «red» and move coasting, instead of intensively braking in front of the car in front.
7) Proper tire pressure reduces Mitsubishi fuel consumption.
Check the pressure regularly. Insufficient increases rolling resistance (read Mitsubishi fuel consumption), negatively affects the handling and stability of the car, harms the tire itself.
8) Running the engine on a standing car increases Mitsubishi’s fuel consumption.
Turn off the engine in traffic jams and at regulated intersections if there are a lot of cars gathered in front of the traffic light and you will have to stand for a long time.
9) The absence of an «economical» mode on the «automatic» increases Mitsubishi’s fuel consumption.
Set the selector to the position corresponding to the «Winter» program. Automation will include higher gears earlier. Of course, if there is a special «economical» program, then it should be involved.
10) Modern high-quality (usually synthetic or semi-synthetic) energy-saving engine and gearbox oils reduce Mitsubishi fuel consumption.
11) Tires with low rolling resistance are not a tribute to fashion, but a reduction in Mitsubishi fuel consumption.
قليل استهلاك الوقود لميتسوبيشي Mitsubishi