MITSUBISHI FUEL ACTIVATOR — a device which is installed on a fuel hose of any Mitsubishi car and significantly reduces fuel consumption Mitsubishi by 20% and improves the engine performance. Therefore, with the same amount of fuel on your Mitsubishi, you will drive MORE KILOMETERS!
Activators are installed on all models of Mitsubishi and are used in all types of fuel — GAS, PETROL, DIESEL FUEL.
The Activators are easy to install, they are installed on the Mitsubishi fuel supply hose in a few minutes:
1. Mitsubishi fuel consumption is reduced by 20%.
2. A slight increase in the power of the Mitsubishi engine.
3. Extends the service life of the Mitsubishi engine.
4. The content of carbon monoxide and other pollutants in Mitsubishi exhaust gases is reduced by 30-40%.
5. Stable and dynamic operation of the Mitsubishi engine.
6. Reduces the formation of soot and carbon deposits on Mitsubishi pistons, cylinders, spark plugs, fuel injectors, catalyst and exhaust pipes.
7. Extends the service life of the Mitsubishi catalyst, lambda probe, spark plugs and Mitsubishi fuel injectors.
Mitsubishi ACTIVATOR reduces fuel consumption by 20%.
At the same time, the engine operation of Mitsubishi is significantly improved.
Examples of installation on different models of Mitsubishi.
ANY FUEL (petrol, diesel, gas), by going through 10 magnetic fields of THESE ACTIVATORS, for a short time changes its structure and properties, and it BURNS more fully and REGULARLY.
Due to this, the Mitsubishi engine begins to work much BETTER.
Usually, it is already seen after 10-20 km of run of the car Mitsubishi which has an installed Activator.
Imagine, how your Mitsubishi engine works with VERY GOOD FUEL
That is, we have quite different (better) fuel.
You agree that chopped firewood burns much better than whole logs … The same thing happens with automotive fuel in the cylinders of the Mitsubishi engine.
Activators installed on Mitsubishi reduce the density and viscosity of fuel:
1. This leads to the formation of smaller fuel particles, ensures good atomization and combustion in the cylinders of the Mitsubishi engine.
2. The fuel ignites better and burns smoothly, ensuring soft and smokeless operation of the Mitsubishi engine.
3. Reduces deposits on injectors and carbon deposits on candles and Mitsubishi cylinders.
4. Reduces the load on the operation of Mitsubishi fuel supply systems.
5. Increases reliability and increases the life of Mitsubishi fuel equipment.
All this leads to improved conditions for fuel combustion Mitsubishi cylinders.
FUEL with Activators burns more completely in the Mitsubishi engine, does not leave carbon deposits on pistons, cylinders and spark plugs.
On Mitsubishi cars, the injectors are not polluted, and there is no black smoke even at throttling at free running.
Knowing where the fuel hoses are located, Activators at Mitsubishi are installed within 5 minutes (see «INSTALLATION»)
ATTENTION! The main difference of THESE ACTIVATORS is that there are 20 magnets placed in them, which for a short time CHANGE THE STRUCTURE AND PROPERTIES OF FUEL. In other similar Aktivators which can be used on Mitsubishi, there are only 2 powerful magnets which are not able to change anything in the fuel (see «ANALOGUES» ).
When you don’t like the Aktivators, then with no doubt you can return them back within 37 days (read «RETURN»).
ACTIVATOR reduces the fuel consumption of any MITSUBISHI vehicle by 20%. Therefore, with the same amount of fuel on your Mitsubishi, you will drive MORE KILOMETERS!
The operating life is at least 15 years
We produce and sell them starting from 2008
PRICE:
The set of Activators (2 Activators) — 90,00 EUR
The price includes the deliver by post.
NOVELTY
When installing on Mitsubishi both the Fuel combustion Activators and Activator Autothermia, FUEL CONSUMPTION is reduced by 30-40%!
Read «ACTIVATOR OF AUTOTHERMIE»
PATENTS
(click on the image, to enlarge it)
How else can you reduce Mitsubishi fuel consumption
Open windows or a sunroof have a negligible effect on Mitsubishi fuel consumption at low speeds. At high speeds, Mitsubishi’s fuel consumption will increase by 0.2-0.5 liters
Head lighting and fog lights will increase Mitsubishi’s fuel consumption by about 0.3 liters, so do not turn on powerful electricity consumers unnecessarily.
You need to learn how to do little: save Mitsubishi fuel with all your might and means.
Believe me, you already have everything you need to reduce Mitsubishi fuel consumption by a third (!). Don’t you believe it?
1) Anything that interferes with aerodynamics increases Mitsubishi’s fuel consumption.
This is a wide-profile rubber, not provided by the manufacturer: decorative spoilers, «muzzles» with ears on the hood, and other trinkets. Mitsubishi’s fuel consumption is also increased by trunks — even streamlined boxes, not to mention traditional metal trusses, even if empty. In a word, everything is superfluous!
2) Constantly switched on electricity consumers increase Mitsubishi fuel consumption.
Hence the conclusion: turn it on only as needed. Condishn, for example, will cost an additional 0.8 liters of Mitsubishi fuel for every 100 km. Naturally, this rule does not apply to those regions where you need to drive with low beam even during the day.
3) Warming up the motor to operating temperature after cold start increases Mitsubishi fuel consumption.
Get moving as soon as possible. Under load, the engine warms up much faster than at idle, and the neighbors will not take revenge with punctured tires for the morning roar and fumes.
4) The sudden start of movement increases Mitsubishi’s fuel consumption.
Get moving without stepping on the accelerator pedal to the point of failure, switch to the next gear as early as possible. If possible, try to drive in the highest gear — modern engines, especially diesel engines, allow you to switch to the fourth already at 50 km / h.
5) The engine must run at a speed corresponding to the maximum torque — this reduces Mitsubishi fuel consumption.
To do this, you do not need to raise the design documentation and make requests to the manufacturer, just look at the accompanying documents of the car. It looks like this: maximum torque (xxx Nm / xxx rpm). (For Mitsubishi, the maximum torque is at 3000 rpm, while the speed of the car is 90 km /h.)
6) Proportionate and prudent movement saves Mitsubishi fuel consumption.
Calculate the traffic situation, avoid unnecessary acceleration and full throttle movement, remove your foot from the gas pedal in advance before the «red» and move coasting, instead of intensively braking in front of the car in front.
7) Proper tire pressure reduces Mitsubishi fuel consumption.
Check the pressure regularly. Insufficient increases rolling resistance (read Mitsubishi fuel consumption), negatively affects the handling and stability of the car, harms the tire itself.
8) Running the engine on a standing car increases Mitsubishi’s fuel consumption.
Turn off the engine in traffic jams and at regulated intersections if there are a lot of cars gathered in front of the traffic light and you will have to stand for a long time.
9) The absence of an «economical» mode on the «automatic» increases Mitsubishi’s fuel consumption.
Set the selector to the position corresponding to the «Winter» program. Automation will include higher gears earlier. Of course, if there is a special «economical» program, then it should be involved.
10) Modern high-quality (usually synthetic or semi-synthetic) energy-saving engine and gearbox oils reduce Mitsubishi fuel consumption.
11) Tires with low rolling resistance are not a tribute to fashion, but a reduction in Mitsubishi fuel consumption.
The reasons for the high fuel consumption of Mitsubishi
One of the main reasons for the higher fuel consumption of Mitsubishi is the technical condition of the car. The worse it is, the more difficult it will be to save Mitsubishi fuel, no matter what methods you use. The most popular breakdowns that instantly lead to a further increase in Mitsubishi fuel consumption:
1) Breakdown in the Mitsubishi engine: the spark plug does not work, the timing belt is stretched, problems starting the engine.
2) Failure of Mitsubishi sensors: lambda probe, oxygen, idle, airflow.
3) The Mitsubishi air or oil filter is very clogged.
4) The Mitsubishi engine has been heating up for too long. It takes only 3 minutes to improve the viscosity of the engine oil and ensure the lubrication of all components. After that, you can start at low speeds.
5) Poor condition of Mitsubishi tires.
6) Incorrect angle of inclination- convergence of Mitsubishi wheels. Such a procedure should be carried out every 20 thousand kilometers.
7) A faulty brake system increases Mitsubishi’s fuel consumption by up to 15%.
8) Excessive external body kit of the car set-up (additional luggage racks, bows, spoilers, etc.). In addition to spending too much Mitsubishi fuel, these decorative elements greatly reduce the aerodynamics of the Mitsubishi car.
9) Open the Mitsubishi windows when driving at high speed.
10) The new Mitsubishi car «consumes» more fuel by default than the previous one.
11) Mitsubishi’s aggressive driving style — sharp starting and braking.
Now let’s move on to a more detailed study of all the methods of how to save Mitsubishi fuel.
Mitsubishi driving style
When starting the Mitsubishi engine, only 3 minutes are enough to ensure that the engine oil warms up and that all components of the power unit are lubricated. Therefore, there is no point in sitting and waiting, this will only lead to increased fuel consumption of Mitsubishi. Also, do not believe in the myths that a large amount of Mitsubishi fuel is consumed when starting the engine.
If you drive at a speed of 80 km/ h, you will notice that Mitsubishi gasoline will be spent much less. It may be unusual for you at first, but then you will get used to it. In addition, it will increase your safety. This applies to driving in the city as well as on the highway.
According to statistics, the aggressive driving style will increase Mitsubishi’s fuel consumption to 300 liters per year.
Mitsubishi’s aggressive driving style
Remember, the less you accelerate and brake, the less fuel Mitsubishi will consume. Ideally, it is a soft start and maintaining the same speed value. Do not step on the accelerator sharply — otherwise the Mitsubishi fuel will begin to be consumed many times more. Drive slowly in front of red traffic lights, it is best to calculate and, without pressing the brake, drive through the green light.
When driving a mechanic, switch to an upshift on time. The most economical Mitsubishi mode here is the fifth or sixth speed and driving up to 80 km/h.Keep around 2500 revolutions. Just press gently and briefly at speeds above 30 km/h. When driving at 3000 rpm and higher, 3.5 times more Mitsubishi fuel is consumed than at 1500 rpm. If the gas is almost at zero, then you need to drive at a speed of 50 km /h and at low rpm, then you can easily get to the nearest gas station.
In the «automatic», Mitsubishi’s fuel consumption is always higher by default. To save money in some way, just step on the accelerator smoothly.
A sharp start (when the engine is started up to 4000 rpm) leads to an increase in Mitsubishi fuel consumption by 15%. But this does not last long, because the car quickly reaches an average speed. This is especially true for those who pass from one traffic light to another in the city. By doing this, he does not drive faster than others, but only spends more Mitsubishi fuel.
Try to always keep no more than 2500 revolutions
I note that many cars have a «Start and stop» system that turns off the Mitsubishi engine when stopped (for example, in front of traffic lights or in traffic jams). On older Mitsubishi models, you can turn off the engine yourself during extended stops (more than 1 minute).
When you are in a traffic jam, always choose that distance to reduce the speed as little as possible. After all, a certain amount of Mitsubishi fuel is additionally spent on each start-up.
It is better to brake with the engine (without using the brake pedal). Here, Mitsubishi’s fuel consumption is almost zero.
Remember! Driving in neutral also leads to increased fuel consumption of Mitsubishi.
Choose a parking lot to perform the reverse driving maneuver as little as possible.
When traveling on the same routes («home-work-shop»), and if the distance between them does not exceed 7 km, you will have to spend on Mitsubishi fuel for convenience. After all, every time the car is started, the Mitsubishi engine does not have time to warm up (especially in the cold season) for small trips.
It is also worth understanding that according to the passport it can be written that the car consumes 5 liters per 100 km of mileage, but know that these values are obtained under ideal conditions. With actual conditions and driving styles, these figures can vary significantly. This is a marketing ploy.
What other additional methods can be used for more serious Mitsubishi fuel economy?
Aerodynamics of the Mitsubishi automobile
The higher the force of airflow resistance and the higher the speed of the car, the more fuel Mitsubishi will consume. For example, when driving at a speed of 80-100 km / h, consumption is 6 liters per 100 km of mileage, and at 130 km / h 9 liters of gasoline will be consumed.
Mitsubishi Aerodynamics
The more different body kits there are, the higher the air resistance coefficient will be. If you hang the whole car with various beauties and roll down the windows, then Mitsubishi fuel will be consumed 25% more (when driving at more than 90 km / h). If you have a broken spoiler or other decorative detail, you need to remove or replace it, as it will cut the air and increase the fuel consumption of the Mitsubishi.
If you make a very high-quality aerodynamic body kit, which is made to improve the dynamics of the car, at high speeds you can achieve real Mitsubishi fuel economy. However, it is not at all cheap.
The best aerodynamic body for a Mitsubishi car is a sedan.
Mitsubishi Electronics
Turn off all electronic devices (on-board computer, stove, fan) if necessary. It may not be very comfortable, but it will save you money. All of them consume energy from the battery and this one consumes energy from the motor. Therefore, if the gas is at zero, it is better to turn off all household appliances before refueling. And in winter, do not turn on the stove in the cabin when the engine is warming up. This will help to reduce Mitsubishi’s fuel by 5%.
Car air conditioning can consume up to 20% of Mitsubishi fuel
The interior cooling system in operation consumes 5 to 20% of Mitsubishi fuel. This is especially true when driving at high speed. But many people drive comfortably, because that’s what the car was bought for, to ensure a comfortable trip.
Weight of the Mitsubishi car
When overloading the car for every 100 kg of cargo, about 10% of Mitsubishi fuel is consumed from above. Therefore, carry only the necessary things in the car. And if you use a roof bar, take it apart when you don’t need it.
In addition, a full tank of gasoline (60 liters) adds 45 kg to most of the car. Therefore, it is better that Mitsubishi always has a little less than half a tank of fuel left.
Climate and road Mitsubishi
When the air temperature drops, it takes longer to warm up the engine (and the interior). It is when the cold engine is heated that more Mitsubishi fuel is supplied than when the engine is heated. Therefore, the best thing for Moderna Mitsubishi cars is to start the car for 3 minutes, quickly remove the snow and start driving. In the first 15 minutes, do not exceed 2500 revolutions on a gasoline engine and 2000 revolutions on a diesel engine.
There is no point in heating a Moderna Mitsubishi car at idle
Also remember that when driving on a bad road, the rolling friction of the wheels increases: wet asphalt, ice, primer. The more slips, the more Mitsubishi fuel will be wasted.
And when coming down a hill in the «mechanics», drive with the gear on — this will reduce the fuel consumption of Mitsubishi compared to a tight or «neutral» clutch. This is due to the idling and stopping of the Mitsubishi fuel supply.
Driving behind a Mitsubishi truck
This is a good way to save gas when driving on the highway. When you drive behind large cars at a distance of 3-5 meters, your car will not experience air resistance, and therefore you will significantly save Mitsubishi fuel. In addition, it will have to adjust to the speed of the truck, it will move smoothly, which also has a positive effect on Mitsubishi’s fuel consumption.
But I note that this method is suitable for experienced people, since the view from the road is significantly reduced. In addition, if you move between 2 trucks and an emergency braking occurs, it may simply be imperceptible. In addition, the disadvantage is that the exhaust gases enter directly into the interior of the Mitsubishi car.
Mitsubishi cruise control
If your car has a cruise control function, be sure to use it when driving long distances. The car will move smoothly, which will help you save a lot of Mitsubishi fuel.
The technical condition of the car.
Now let’s move on to studying all the technical aspects that will help Mitsubishi save fuel.
Mitsubishi Tires
It is necessary to check the pressure in all tires regularly. First of all, it has to do with security. But here it should be understood that even a slight decrease in pressure can significantly increase the fuel consumption of Mitsubishi (a decrease of 0.5 atm. it will increase consumption by 5-6 liters of fuel per year). And if the pressure in the tire is uneven, then Mitsubishi’s fuel consumption will increase by up to 5%. The same applies if the tire tread is very worn. The optimal pressure values for your car are indicated on the driver’s door.
The lower the tire pressure, the more Mitsubishi fuel is consumed
If the tires become overinflated, their wear will increase and their stiffness will increase.
Some manufacturers produce fuel-efficient tires that are more expensive than conventional ones. The tires have less rolling resistance, which helps to save up to 5% of Mitsubishi fuel. To save even more, you can install lightweight disks.
To save some Mitsubishi fuel, you can slightly increase the tire pressure (between 0.2 and 0.3 atm.). This is especially true when the car is carrying large loads.
Some people like to play trendy wide discs. But the wider the tires, the greater the aerodynamic drag and excessive fuel consumption of Mitsubishi.
Spark plugs Mitsubishi
Spark plugs affect the combustion quality of Mitsubishi fuel. If it is not completely burned out, the power will decrease and the consumption of Mitsubishi gasoline will increase. Check the candles periodically and change them in advance. The longer the candles work, the worse the quality of fuel combustion will be.
It is best to put platinum or iridium candles, the service life of which is 4 times longer than conventional ones. They help to increase the discharge stability and spark separation. As a result, Mitsubishi candles work more efficiently even with a lot of pollution.
Mitsubishi Collapse
Every 15-20 thousand km of Mitsubishi mileage, adjust the inclination. On average, this will help save 60 liters of gasoline per year, as well as reduce rubber wear.
Mitsubishi Tuning
The chip tuning is designed to increase the power of the engine, but at the same time there will be rapid engine wear and a multiple increase in Mitsubishi fuel consumption.
If you plan to increase the ground clearance under the shock absorbers or springs, be prepared to spend 8% more Mitsubishi fuel.
How to save on Mitsubishi fuel
A car with an automatic transmission consumes more Mitsubishi fuel than a «mechanic» by up to 15%. Therefore, to get the maximum savings, adhere to the following rules:
Gently press the accelerator and brake pedals, do not allow Mitsubishi to accelerate quickly.
Always move the lever to the neutral position when stopping.
Always turn on the cruise control when driving long distances.
If there is a «winter» mode, then it should be turned on more often. It helps to reduce the load on the engine.
How to save Mitsubishi fuel in mechanics
To change gears in Mitsubishi, you need to follow the following tips:
First gear-starting from the seat of the Mitsubishi car;
The second is the acceleration of the Mitsubishi.;
The third is to overtake vehicles in Mitsubishi cars.;
The fourth is riding in urban environments for Mitsubishi.;
The fifth (sixth) — traffic on the road in the Mitsubishi car.
In the «mechanics», choose the appropriate gear. If you press the accelerator to the floor in high gear, the acceleration will be weak, and the Mitsubishi fuel consumption will be high.
At a speed of 60 km/h, shift into high gear. It also helps when Mitsubishi has almost no fuel and the gas station is very far away.
MITSUBISHI. Reducir el consumo de combustible Mitsubishi