FORD FUEL ACTIVATOR — a device which is installed on a fuel hose of any Ford car and significantly reduces fuel consumption Ford by 20% and improves the engine performance. Therefore, with the same amount of fuel on your Ford, you will drive MORE KILOMETERS!

Activators are installed on all models of Ford and are used in all types of fuel — GAS, PETROL, DIESEL FUEL.

The Activators are easy to install, they are installed on the Ford fuel supply hose in a few minutes:

1. Ford fuel consumption is reduced by 20%.
2. A slight increase in the power of the Ford engine.
3. Extends the service life of the Ford engine.
4. The content of carbon monoxide and other pollutants in Ford exhaust gases is reduced by 30-40%.
5. Stable and dynamic operation of the Ford engine.
6. Reduces the formation of soot and carbon deposits on Ford pistons, cylinders, spark plugs, fuel injectors, catalyst and exhaust pipes.
7. Extends the service life of the Ford catalyst, lambda probe, spark plugs and Ford fuel injectors.

Ford ACTIVATOR reduces fuel consumption by 20%.

At the same time, the engine operation of Ford is significantly improved.

Examples of installation on different models of Ford.

Click on the photos, to enlarge

ANY FUEL (petrol, diesel, gas), by going through 10 magnetic fields of THESE ACTIVATORS, for a short time changes its structure and properties, and it BURNS more fully and REGULARLY.
Due to this, the Ford engine begins to work much BETTER.

Usually, it is already seen after 10-20 km of run of the car Ford which has an installed Activator.

Imagine, how your Ford engine works with VERY GOOD FUEL …
That is, we have quite different (better) fuel.

  You agree that chopped firewood burns much better than whole logs … The same thing happens with automotive fuel in the cylinders of the Ford engine.

Activators installed on Ford reduce the density and viscosity of fuel:

1. This leads to the formation of smaller fuel particles, ensures good atomization and combustion in the cylinders of the Ford engine.
2. The fuel ignites better and burns smoothly, ensuring soft and smokeless operation of the Ford engine.
3. Reduces deposits on injectors and carbon deposits on candles and Ford cylinders.
4. Reduces the load on the operation of Ford fuel supply systems.
5. Increases reliability and increases the life of Ford fuel equipment.

All this leads to improved conditions for fuel combustion in Ford cylinders.

    FUEL with Activators burns more completely in the Ford engine, does not leave carbon deposits on pistons, cylinders and spark plugs.

     On Ford cars, the injectors are not polluted, and there is no black smoke even at throttling at free running.

Knowing where the fuel hoses are located, Activators at Ford are installed within 5 minutes (see «INSTALLATION»)

     ATTENTION! The main difference of THESE ACTIVATORS is that there are 20 magnets placed in them, which for a short time CHANGE THE STRUCTURE AND PROPERTIES OF FUEL.    In other similar Aktivators which can be used on Ford, there are only 2 powerful magnets which are not able to change anything in the fuel (see «ANALOGUES» ).

     When you don’t like the Aktivators, then with no doubt you can return them back within 37 days (read «RETURN»).

ACTIVATOR reduces the fuel consumption of any FORD vehicle by 20%. Therefore, with the same amount of fuel on your Ford, you will drive MORE KILOMETERS!

The operating life is at least 15 years
We produce and sell them starting from 2008

PRICE:

The set of Activators (2 Activators) — 90,00 EUR

The price includes the deliver by post.

NOVELTY

When installing on Ford both the Fuel combustion Activators and Activator Autothermia, FUEL CONSUMPTION is reduced by 30-40%!

Read «ACTIVATOR OF AUTOTHERMIE»

PATENTS
(click on the image, to enlarge it)

Ford fuel consumption cars-advantages and disadvantages

General advantages of Ford cars
Each car of this brand has both advantages and disadvantages. General advantages of this brand:
• good security system, in particular, a good brake system;
* distinctive design;
• spacious, roomy trunk;
• economical engine;
* unlike many other brands, Ford has high-quality factory painting;
* comfortable interior with multi-functional dashboard;
* good handling of the car in any weather;
* satisfactory prices for auto parts.
Common disadvantages of Ford cars
Any car of any brand has, unfortunately, certain drawbacks. Ford cars are no exception. Consider the General disadvantages of this brand:
• not quite convenient access to the gas tank;
• low noise insulation;
• poor performance;
• low weight front bumper;
* car suspension is prone to breakdowns.
If we consider the overall picture of the car, the minus of this brand is not very significant!
Popular brands of Ford cars
To date, the most popular brands of Ford are: Ford Fiesta, Ford Focus, Ford Mondeo, here is a Ford Transit, Ford Mustang.
The most economical car of this brand include Ford Fiesta, as the engine volume and gasoline consumption of the car is not very large. And dimensions are not large, can be attributed to the class of cars «small» cars! However, the car has a fairly roomy interior, and can be both three-door and five-door.
Larger ones include Ford Focus and Ford Mondeo. These cars are quite similar to each other in the fuel consumption system. The main difference is that the Ford Mondeo is more powerful and new. The latest model was released in 2015.
Ford has in its ranks and vans. These include Ford Transit. This car has quite an attractive appearance and one of the best security systems in vans. The power of the car is 95 horsepower, which makes it quite fast.
The fastest and most powerful car is the Ford Mustang. Its 50 ment, the brand has celebrated in 2014. Ford Mustang is famous mainly for its 6-speed manual transmission and also, automatic, and power of 309 horsepower.
Ford cars exist on the market for a huge amount of time and only improved. So, choosing a car, you can choose a car brand Ford!

Ford fuel consumption cars: engine repair features

Cars of the Ford brand are known and loved by many Russian motorists, but the Ford Focus model became especially widespread in the country. These machines are diesel engines, released as part of a family of Duratec and diesel motor Duratorg. Engines running on gasoline, have a volume of 1.4 liters to 2 liters, fuel consumption during their work is quite modest, and power characteristics are improved. As for the turbo engine Duratorg, its volume is 1.8 L.

Electronic control Ford EEC-V is used to control and transmit commands to the power unit of the car. Modifications with gasoline-powered engines are equipped with 3-D electric ignition, SEFI injection system, as well as sensors that control detonation. In the turbo-diesel engine, the fuel supply is carried out by means of a high-pressure plunger fuel pump, which is arranged on the principle of distribution and directs the fuel directly to the combustion chamber.

To Ford motor car functioned without failures and breakdowns, you need to pay attention to the following points:

Elements included in the mixture.
Injection time.
The level of spraying and its quality.
Features of Ford engine repair practice it becomes clear that the more reliable the Assembly of the main components in the structure of the engine, the longer it will last, and this also depends on the degree of need for overhaul. Usually breakdowns affect the system responsible for supplying fuel to the combustion chamber, and work on repair of fuel assemblies – something that has to be resorted to most often when you need to repair the engine Ford Focus.

Another popular model of this brand is the Ford Mondeo car: representatives of this model have diesel engines with 4 cylinders and a turbocharger, the power of which is 1.6 l, 1.8 l and 2 l, respectively. Despite the high quality of engine components and their good Assembly, the units have a number of drawbacks that are revealed during the operation of the machine. More details about these shortcomings can be found in the article on the repair of diesel engines Ford.

As a rule, problems with the motor are caused by faulty connecting rod and crankshaft bearings. A sign of this can be barely audible metal knock, which is heard from the engine chamber at the beginning of its work, when the motor is not yet heated.

Features of engine repair Ford fuel consumption

In order to check whether the connecting rod bearings are in order, it is necessary to increase the number of revolutions to the average number on the neutral course, after which the gas is released sharply. If you hear this noise, as described above, you must urgently visit the Ford service station, as this indicates the failure of the bearings. Sometimes to fix the need to change the liner, but it often happens that the diagnosis it turns out that the motor is necessary to install a new crankshaft, grinding, nitration or other actions.

Often in the field of engine and fuel system Ford cars need to replace the timing belt or repair the fuel pump. These services are one of the most popular, because the failure of these units often occur on these machines.

The reasons for Ford’s high fuel consumption

One of the main reasons for Ford’s higher fuel consumption is the technical condition of the car. The worse it is, the more difficult it will be to save Ford fuel, no matter what methods you use. The most popular breakdowns that instantly lead to a further increase in Ford fuel consumption:

1) Ford engine malfunction: the spark plug does not work, the timing belt is stretched, problems starting the engine.
2) Ford sensors failure: lambda probe, oxygen, idle, airflow.
3) The Ford air or oil filter is very clogged.
4) The Ford engine has been heating up for too long. It takes only 3 minutes to improve the viscosity of the engine oil and ensure the lubrication of all components. After that, you can start at low speeds.
5) Poor condition of Ford tires.
6) Incorrect angle of inclination- Ford wheel convergence. Such a procedure should be carried out every 20 thousand kilometers.
7) A faulty brake system increases Ford’s fuel consumption by up to 15%.
8) Excessive external body kit of the car set-up (additional luggage racks, bows, spoilers, etc.). In addition to spending too much Ford fuel, these decorative elements greatly reduce the aerodynamics of the Ford car.
9) Open the Ford windows when driving at high speed.
10) The new Ford car «consumes» more fuel by default than the previous one.
11) Ford’s aggressive driving style — sharp starting and braking.
Now let’s move on to a more detailed study of all the methods of how to save Ford fuel.

Ford’s driving style

When starting the Ford engine, only 3 minutes are enough to ensure that the engine oil warms up and that all components of the power unit are lubricated. Therefore, there is no point in sitting and waiting, this will only lead to increased fuel consumption of Ford. Also, do not believe in the myths that a large amount of Ford fuel is consumed when starting the engine.

If you drive at a speed of 80 km/ h, you will notice that Ford gasoline will be spent much less. It may be unusual for you at first, but then you will get used to it. In addition, it will increase your safety. This applies to driving in the city as well as on the highway.

According to statistics, the aggressive driving style will increase Ford’s fuel consumption to 300 liters per year.

Ford’s aggressive driving style

Remember, the less you accelerate and brake, the less fuel Ford will consume. Ideally, it is a soft start and maintaining the same speed value. Do not step on the accelerator sharply — otherwise the Ford fuel will begin to be consumed many times more. Drive slowly in front of red traffic lights, it is best to calculate and, without pressing the brake, drive through the green light.

When driving a mechanic, switch to an upshift on time. The most economical Ford mode here is the fifth or sixth speed and driving up to 80 km/h.Keep around 2500 revolutions. Just press gently and briefly at speeds above 30 km/h. When driving at 3000 rpm and more, 3.5 times more Ford fuel is consumed than at 1500 rpm. If the gas is almost at zero, then you need to drive at a speed of 50 km /h and at low rpm, then you can easily get to the nearest gas station.

In the «automatic», Ford’s fuel consumption is always higher by default. To save money in some way, just step on the accelerator smoothly.
A sharp start (when the engine is started up to 4000 rpm) leads to an increase in Ford fuel consumption by 15%. But this does not last long, because the car quickly reaches an average speed. This is especially true for those who pass from one traffic light to another in the city. By doing this, you do not drive faster than others, but only spend more Ford fuel.
Try to always keep no more than 2500 revolutions

I notice that many cars have a «Start and stop» system that turns off the Ford engine when stopped (for example, in front of traffic lights or in traffic jams). On older Ford models, you can turn off the engine yourself during extended stops (more than 1 minute).

When you are in a traffic jam, always choose that distance to reduce the speed as little as possible. After all, a certain amount of Ford fuel is additionally spent on each start-up.

It is better to brake with the engine (without using the brake pedal). Here, Ford’s fuel consumption is almost zero.
Remember! Driving in neutral also leads to increased Ford fuel consumption.
Choose a parking lot to perform the reverse driving maneuver as little as possible.

When traveling on the same routes («home-work-workshop»), and if the distance between them does not exceed 7 km, you will have to spend on Ford fuel for convenience. After all, every time the car is started, the Ford engine does not have time to warm up (especially in the cold season) for small trips.

It is also worth understanding that according to the passport it can be written that the car consumes 5 liters per 100 km of mileage, but know that these values are obtained under ideal conditions. With actual conditions and driving styles, these figures can vary significantly. This is a marketing ploy.

What other additional methods can be used for more serious Ford fuel economy?

Aerodynamics of the Ford automobile

The greater the force of airflow resistance and the higher the speed of the car, the more fuel Ford will consume. For example, when driving at a speed of 80-100 km / h, consumption is 6 liters per 100 km of mileage, and at 130 km / h 9 liters of gasoline will be consumed.
Ford Aerodynamics
The more different body kits there are, the higher the air resistance coefficient will be. If you hang the whole car with various beauties and roll down the windows, then Ford fuel will be consumed 25% more (when driving at more than 90 km / h). If you have a broken spoiler or other decorative detail, you need to remove or replace it, as it will cut the air and increase the fuel consumption of the Ford.
If you make a very high-quality aerodynamic body kit, which is made to improve the dynamics of the car, at high speeds you can achieve real Ford fuel economy. However, it is not at all cheap.
The best aerodynamic body for a Ford car is a sedan.
Ford Electronics
Turn off all electronic devices (on-board computer, stove, fan) if necessary. It may not be very comfortable, but it will save you money. All of them consume energy from the battery and this one consumes energy from the motor. Therefore, if the gas is at zero, it is better to turn off all household appliances before refueling. And in winter, do not turn on the stove in the cabin when the engine is warming up. This will help to reduce Ford’s fuel by 5%.
Car air conditioning can consume up to 20% Ford fuel
The operating interior cooling system consumes 5 to 20% of Ford fuel. This is especially true when driving at high speed. But many people drive comfortably, because that’s what the car was bought for, to ensure a comfortable trip.
Weight of the Ford car
When overloading the car for every 100 kg of cargo, about 10% of Ford fuel is consumed from above. Therefore, carry only the necessary things in the car. And if you use a roof bar, take it apart when you don’t need it.
In addition, a full tank of gasoline (60 liters) adds 45 kg to most of the car. Therefore, it is better that Ford always has a little less than half a tank of fuel left.
Climate and Road Ford
When the air temperature drops, it takes longer to warm up the engine (and the interior). It is when the cold engine is heated that more Ford fuel is supplied than when the engine is heated. Therefore, the best thing for Moderna Ford cars is to start the car for 3 minutes, quickly remove the snow and start driving. In the first 15 minutes, do not exceed 2500 revolutions on a gasoline engine and 2000 revolutions on a diesel engine.
There is no point in heating up a Moderna Ford car at idle
Also remember that when driving on a bad road, the rolling friction of the wheels increases: wet asphalt, ice, primer. The more slips, the more Ford fuel will be wasted.
And when coming down a hill on the «mechanics–, drive with the gear on — this will reduce Ford’s fuel consumption compared to a tight or «neutral» clutch. This is due to the idling and stopping of the Ford fuel supply.
Driving behind a Ford truck
This is a good way to save gas when driving on the highway. When you drive behind large cars at a distance of 3-5 meters, your car will not experience air resistance, and therefore you will significantly save Ford fuel. In addition, it will have to adjust to the speed of the truck, it will move smoothly, which also has a positive effect on Ford’s fuel consumption.
But I note that this method is suitable for experienced people, since the view from the road is significantly reduced. In addition, if you move between 2 trucks and an emergency braking occurs, it may simply be imperceptible. In addition, the disadvantage is that the exhaust gases enter directly into the interior of the Ford car.
Ford cruise control
If your car has a cruise control function, be sure to use it when driving long distances. The car will move smoothly, which will help you save a lot of Ford fuel.
The technical condition of the car.
Now let’s move on to studying all the technical aspects that will help Ford save fuel.
Ford Tires
It is necessary to check the pressure in all tires regularly. First of all, it has to do with security. But here it should be understood that even a slight decrease in pressure can significantly increase Ford’s fuel consumption (a decrease of 0.5 atm. it will increase consumption by 5-6 liters of fuel per year). And if the pressure in the tire is uneven, then Ford’s fuel consumption will increase by up to 5%. The same applies if the tire tread is very worn. The optimal pressure values for your car are indicated on the driver’s door.
The lower the tire pressure, the more Ford fuel is consumed
If the tires become overinflated, their wear will increase and their stiffness will increase.
Some manufacturers produce fuel-efficient tires that are more expensive than conventional ones. The tires have less rolling resistance, which helps to save up to 5% of Ford fuel. To save even more, you can install lightweight disks.
To save some Ford fuel, you can slightly increase the tire pressure (between 0.2 and 0.3 atm.). This is especially true when the car is carrying large loads.
Some people like to play trendy wide discs. But the wider the tires, the greater the aerodynamic drag and excessive fuel consumption of Ford.
Spark plugs for Ford
Spark plugs affect the combustion quality of Ford fuel. If it is not completely burned out, the power will decrease and the consumption of Ford gasoline will increase. Check the candles periodically and change them in advance. The longer the candles work, the worse the quality of fuel combustion will be.
It is best to put platinum or iridium candles, the service life of which is 4 times longer than conventional ones. They help to increase the discharge stability and spark separation. As a result, Ford sails work more efficiently even with a lot of pollution.
Ford Collapse
Every 15-20 thousand km of Ford mileage, adjust the inclination. On average, this will help save 60 liters of gasoline per year, as well as reduce rubber wear.
Ford Tuning
The chip tuning is designed to increase the power of the engine, but at the same time there will be rapid engine wear and a multiple increase in Ford fuel consumption.
If you plan to increase the ground clearance under the shock absorbers or springs, be prepared to spend 8% more Ford fuel.
How to save Ford fuel
A car with an automatic transmission consumes more Ford fuel than a «mechanic» by up to 15%. Therefore, to get the maximum savings, adhere to the following rules:
Gently press the accelerator and brake pedals, do not allow Ford to accelerate quickly.
Always move the lever to the neutral position when stopping.
Always turn on the cruise control when driving long distances.
If there is a «winter» mode, then it should be turned on more often. It helps to reduce the load on the engine.
How to save Ford fuel on mechanics
To change gears in Ford, you need to follow the following tips:
First gear- starting from the seat of the Ford car;
The second is the acceleration of the Ford.;
The third is to overtake vehicles in Ford cars.;
The fourth is riding in urban environments for Ford.;
The fifth (sixth) — traffic on the road in the Ford car.
In the «mechanics», choose the appropriate gear. If you press the accelerator to the floor in high gear, acceleration will be weak, and Ford’s fuel consumption will be high.
At a speed of 60 km/h, shift into high gear. It also helps when Ford is almost out of gas and the gas station is far away.

FORD. Reducir el consumo de combustible Ford