CHRYSLER FUEL CONSUPTION ACTIVATOR — a device which is installed on a fuel hose of any Chrysler car and significantly reduces fuel consumption Chrysler by 20% and improves the engine performance. Therefore, with the same amount of fuel on your Chrysler, you will drive MORE KILOMETERS!

Activators on CHRYSLER fully pay off in 3-4 months!
The service life of Activators for CHRYSLER is 10-15 years.

Activators are installed on all models of Chrysler and are used in all types of fuel — GAS, PETROL, DIESEL FUEL.

The activators are easy to install, they are installed on the Chrysler fuel supply hose in a few minutes:

1. Chrysler fuel consumption is reduced by 20%.
2. A slight increase in the power of the Chrysler engine.
3. Extends the service life of the Chrysler engine.
4. The content of carbon monoxide and other pollutants in Chrysler exhaust gases is reduced by 30-40%.
5. Stable and dynamic operation of the Chrysler engine.
6. Reduces the formation of soot and carbon deposits on Chrysler pistons, cylinders, spark plugs, fuel injectors, catalyst and exhaust pipes.
7. Extends the service life of the Chrysler catalyst, lambda probe, spark plugs and Chrysler fuel injectors.

Chrysler ACTIVATOR reduces fuel consumption by 20%.

At the same time, the engine operation of Chrysler is significantly improved.

Examples of installation on different models of Chrysler.

Click on the photos, to enlarge

ANY FUEL (petrol, diesel, gas), by going through 10 magnetic fields of THESE ACTIVATORS, for a short time changes its structure and properties, and it BURNS more fully and REGULARLY.
Due to this, the Chrysler engine begins to work much BETTER.

Usually, it is already seen after 10-20 km of run of the car Chrysler which has an installed Activator.

Imagine, how your Chrysler engine works with VERY GOOD FUEL …
That is, we have quite different (better) fuel.

     You agree that chopped firewood burns much better than whole logs … The same thing happens with automotive fuel in the cylinders of the Chrysler engine.

Activators installed on Chrysler reduce the density and viscosity of fuel:

1. This leads to the formation of smaller fuel particles, ensures good atomization and combustion in the cylinders of the Chrysler engine.
2. The fuel ignites better and burns smoothly, ensuring soft and smokeless operation of the Chrysler engine.
3. Reduces deposits on injectors and carbon deposits on candles and Chrysler cylinders.
4. Reduces the load on the operation of Chrysler fuel supply systems.
5. Increases reliability and increases the life of Chrysler fuel equipment.

All this leads to improved conditions for fuel combustion in Chrysler cylinders.

    FUEL with Activators burns more completely in the Chrysler engine, does not leave carbon deposits on pistons, cylinders and spark plugs.

     On Chrysler cars, the injectors are not polluted, and there is no black smoke even at throttling at free running.

     On Chrysler diesel cars, the injectors are not polluted, and there is no black smoke even at throttling at free running.

Knowing where the fuel hoses are located, Activators at Chrysler are installed within 5 minutes (see «INSTALLATION»)

     ATTENTION! The main difference of THESE ACTIVATORS is that there are 20 magnets placed in them, which for a short time CHANGE THE STRUCTURE AND PROPERTIES OF FUEL.    In other similar Aktivators which can be used on Chrysler, there are only 2 powerful magnets which are not able to change anything in the fuel (see «ANALOGUES» ).

     When you don’t like the Aktivators, then with no doubt you can return them back within 37 days (read «RETURN»).

ACTIVATOR reduces the fuel consumption of any CHRYSLER vehicle by 20%. Therefore, with the same amount of fuel on your Chrysler, you will drive MORE KILOMETERS!

The operating life is at least 15 years
We produce and sell them starting from 2008

PRICE:

The set of Activators (2 Activators) — 60,00 EUR

The price includes the deliver by post.

NOVELTY

When installing on Chrysler both the Fuel combustion Activators and Activator Autothermia, FUEL CONSUMPTION is reduced by 30-40%!

Read «ACTIVATOR OF AUTOTHERMIE»

PATENTS
(click on the image, to enlarge it)

Increased fuel consumption by Chrysler

What is the reason for the increased fuel consumption in a Chrysler car? Does the car require a visit to an auto repair shop after this problem occurs? What can you check yourself and what should you check?

Chrysler’s fuel consumption is one of the main, if not the most important, parameters controlled by drivers. This is primarily the cost of car maintenance, which depends on it. It should also be remembered that the driver during the operation of the car will never achieve the results that are given by the car manufacturers in the catalogs.

The fuel consumption of a Chrysler depends on many things.

Its height is affected by the technical efficiency of the engine and its components, the patency of filters, the correct tire pressure, the quality of the fuel being refueled, and even the quality of used engine and transmission oil. Driving a car is a battle with a full range of resistances — the more resistances, the greater the fuel consumption of the Chrysler. The fuel consumption of a Chrysler also depends on the driving style and the area in which the car is moving.

Sometimes an increase in fuel consumption is the result of minor damage, careless handling, or inattention. Sometimes this is the result of a failure of one of the Chrysler components. Don’t panic. We will look at all possible reasons for the increased fuel consumption of the Chrysler gasoline engine.

Simple Reasons for Chrysler Increased Fuel Consumption

Driving with the air conditioning system turned on — especially in spring and summer, many people use it. But nothing is free. Especially on a hot day when the air conditioner is heavily loaded. How much can Chrysler’s fuel consumption increase? From 1 to 2 liters / 100 km (approximate data). The smaller the Chrysler engine, the greater its load due to the climate. Therefore, small urban cars with miniature gasoline engines under the hood will be most often on the lists of those cars that have increased gasoline consumption in the summer. Turn off the air conditioner and see if the fuel consumption of the Chrysler returns to the correct value.

Driving with all-wheel drive increases Chrysler fuel consumption

Some Chrysler vehicles are also equipped with 4×4 drive. In modern cars, the 4×4 drive turns on automatically — only if necessary. In other cases, the driver can turn it on himself. It’s worth checking if our Chrysler engine accidentally drives two axles.

Low tire pressure — even a small lack of pressure increases Chrysler fuel consumption

The lack of air in one of the wheels at the level of 0.2 bar leads to the fact that combustion increases by at least 1 percent. By 0.6 bars, this is already about 4 percent. On one wheel.

Currently, new Chrysler vehicles are equipped with a TPMS tire pressure monitoring system, which should warn the driver if the tire pressure is too low. In the case of a cheap intermediate system (without sensors using ABS speed sensors), the readings are not always accurate. It is enough that the air pressure drops in two tires or in all tires, and the system does not warn.

What should I do in this case? Just check the pressure in each tire with a pressure gauge and inflate the tires to the correct values if necessary.

Changing the way a car is used determines the fuel consumption of a Chrysler

A Chrysler car consumes the least amount of fuel when driving out of town at an economical speed in high gear — for example, 90-100 km/ h in fifth or sixth gear (then a compact engine with a 1.4 engine can use an average of about 5 liters / 100 km). The more routes you complete, the less fuel you will consume. If the car’s operating mode suddenly changes and we start driving around the city, the Chrysler’s fuel consumption will increase significantly (in this situation, the compact 1.4L engine will consume 7-8 liters / 100 km). Fuel consumption is also highest for long, short trips when the engine has no chance of reaching operating temperature. A small urban car on an average route of 2-3 km can consume an average of 10 liters / 100 km.

The opposite situation occurs in new cars with smaller, turbocharged Chrysler engines. Practice has shown that these stressful, for example, three-cylinder units are economical in the city, but they start to consume much more fuel when moving dynamically along the route. Consumption can reach up to 10 liters / 100 km.

An additional heavy load on the car or a significant increase in drag — the fuel consumption of the Chrysler will not increase dramatically when we carry an additional passenger. But even with the maximum load of the car (for example, 420 — 450 kg in the case of a compact car), we will certainly notice an increase in consumption.

We have to take into account the higher fuel consumption when we transport a large roof rack or a roof rack with bicycles. This solution causes a significant increase in air resistance and, consequently, an increase in fuel consumption.

Increased Chrysler fuel consumption due to neglect of maintenance

A clogged Chrysler air filter — the intake ports in a passenger car are most often located at a height of 50 to 70 cm from road level. At this altitude, the most dust rises, in the most polluted areas — up to 50 mg / m3. The task of the air filter is to stop this dust from getting into the engine and turbocharger. Filters use paper, non-woven fabric, or both to trap dust. And, of course, they clog up quickly. Especially with frequent use in the city. A clogged filter prevents air from reaching the engine and increases Chrysler’s fuel consumption.
The filter should be changed once a year (or every 15,000 km run). If the filter is obviously dirty, it should be replaced.

The additional drag in the engine caused by the use of unsuitable oil increases Chrysler fuel consumption.

One of the main tasks of engine oil is to reduce friction between the working moving and stationary parts of the engine. Too little oil in the engine means more friction. The oil oxidizes, ages, and collects impurities. The older and worse the oil in the engine, the higher its viscosity and … The oil behaves worse at high temperatures, which causes more friction and more combustion.
The old transmission oil in the gearbox or the oil is selected incorrectly — the situation is like with engine oil — higher resistance.

Worn-out spark plugs — they also increase fuel consumption
Chrysler

Spark plugs should be replaced according to the recommendations of the car manufacturer (usually every 60,000 km).
In vehicles with an older ignition type that use ignition cables (high voltage cables), their condition also affects the amount of combustion. The older they are, the more they consume, because the wires wear out and prevent the spark from flowing into the candles. Copper cores wear out the fastest.

Improper wheel installation increases rolling resistance, which increases Chrysler fuel consumption

The geometry of the wheel may change immediately after entering a large hole or pit. This should be fixed once a year and after each tire change to new ones.

Damaged brake system components Increase Chrysler fuel consumption

The malfunction is usually caused by the fact that the brake fluid was not replaced on time. The old liquid loses its anticorrosive properties, and the piston corrodes. As a result, the working surface of the brake pad constantly rubs against the working surface of the brake disc, causing very strong resistance. In extreme cases, the pads can completely clamp the disc, which can lead to an accident. In the event of such a breakdown, the car moves sluggishly and the fuel consumption of the Chrysler increases significantly. In addition, the rim where the failure occurred is very hot. The car can also pull while braking.
The brake fluid should be changed every two years.

Increased Chrysler fuel consumption due to breakdowns and damages

Increased Chrysler fuel consumption due to a damaged air conditioning system — despite the fact that the compressor is driven by a V-belt, the air conditioning system has a very low efficiency, and Chrysler’s fuel consumption increases significantly. The causes may be damage to the system, too little cooling gas, leaks and a clogged cabin filter.
2. Spent injectors are used in modern direct injection engines — one of the signs of their malfunction is the increased fuel consumption of Chrysler. The reason for premature wear is the use of low-quality fuel and untimely replacement of the fuel filter.
3. Malfunction of the fuel injector controller — which incorrectly calculates the opening time of the injectors and, as a result, too much fuel enters the cylinders.
4. The thermostat of the cooling system is locked in the open position. In the case of this malfunction, the coolant enters the radiator as soon as the Chrysler engine starts. Even after traveling about a dozen kilometers, the engine cannot reach the operating temperature at which combustion is optimal. The engine runs on an enriched mixture for a very long time, which causes a significant increase in Chrysler fuel consumption.
5. Damaged cooling temperature sensor — transmits incorrect data to the ECU engine controller. If the sensor indicates that the liquid temperature is still low, the computer increases the amount of fuel for the Chrysler.
6. Damage to the air flow meter — sometimes caused by contamination of the sensor (which is again due to a poor-quality air filter, but this time not clogged, but permeable to dust), sometimes with wear or mechanical damage (wire breakage). Data from the flow meter installed in the engine intake system is transmitted to the computer of the control unit. Based on them, the computer selects the correct fuel dose for the amount of air. The malfunction of the flow meter must be indicated by the engine indicator light.
7. The Lambda probe is damaged or worn out. The probe looks like a spark plug and is located in the exhaust system (two cars are used in newer cars). Its task is to compare the oxygen content in the air with the oxygen content in the exhaust gases. The information from the lambda sensor is sent to the computer of the control unit. Based on them, the Chrysler computer selects the appropriate composition of the fuel-air mixture. As a result of damage to the probe, incorrect mixture selection and a sudden increase in Chrysler fuel consumption occur. When driving around the city — up to several tens of percent.
The sensor may be subject to wear or mechanical damage, for example, due to a broken wire connecting it to a computer.
Probe failure should be indicated by the engine indicator light.
8. The damper position sensor is defective. The sensor transmits information about the position of the damper flaps to the control unit. Symptoms of sensor malfunction include increased fuel consumption, problems starting the engine, and jerks when adding gas quickly.
9. In the case of some very serious damage, the workshop cannot fully restore the technical efficiency of the Chrysler vehicle in which the suspension elements were moved. Incorrect positioning of the supports leads to incorrect operation of the body and wheels, which creates additional resistance during movement and increases fuel consumption of the Chrysler.

What should I do if suddenly the fuel consumption of the Chrysler has become high?

If no lights come on, keep an eye on the car for 2-3 full refills. If you continue to consume much more fuel than before, you can follow all the points listed in the article step by step and try to fix the problem.

If the Chrysler engine check indicator lights up, one of the wheels heats up while driving, or other problems arise that we cannot diagnose on our own, it is worth visiting an auto repair shop as soon as possible.

Why Strive to Reduce Chrysler’s Fuel Consumption 

There are several reasons why it is important to strive to reduce the fuel consumption of your Chrysler car. :

1.Cost Reduction: The main reason many people strive to reduce Chrysler’s fuel consumption is to save money. By reducing the amount of fuel used, fuel costs can be reduced, which is especially important in the context of rising fuel prices.
2.Environmental conservation: Excessive fuel consumption contributes to air and water pollution, as well as climate change. Reducing Chrysler’s fuel consumption can help reduce greenhouse gas emissions and preserve the environment.
3.Improve road safety: Economical driving can also improve road safety by reducing the risk of accidents and improving vehicle handling.
4.Increase vehicle life: Economical driving can also contribute to increasing vehicle life by reducing wear and fatigue on Chrysler’s mechanical parts.

In short, Chrysler’s commitment to lower fuel consumption is beneficial for both the environment, road safety, personal savings, and vehicle longevity.

saving on car and money

How to reduce Chrysler’s fuel consumption?

Now that we’ve seen the reasons why it’s important to strive to reduce Chrysler’s fuel consumption, let’s take a look at how we can do that.

Vehicle maintenance is a very important element for controlling its Chrysler fuel consumption. A car in poor condition consumes much more energy than a new car. There are several factors that can contribute to the increased fuel consumption of a Chrysler in poor condition. We have identified the most significant ones. :

THE ENGINE IS POLLUTED
If the engine is not serviced regularly, carbon deposits and other residues can accumulate on engine parts, clogging air ducts and filters. This can lead to increased airflow resistance and incomplete combustion of fuel, which can increase Chrysler’s fuel consumption.

INJECTORS
Contaminated injectors can lead to increased Chrysler fuel consumption. The injectors are responsible for spraying fuel into the engine cylinders, and if they are dirty, they may have uneven or incomplete spraying, which can lead to incomplete combustion of the fuel.

This can lead to an increase in Chrysler’s fuel consumption, as the engine needs to work harder to provide the same power. The increase in fuel consumption may vary depending on the degree of contamination of the injectors and the duration of their contamination.

In general, an increase in fuel consumption in the range of 10-20% can be observed when the injectors are dirty. It can also lead to a loss of power and an increase in pollutant emissions.

Therefore, it is important to follow the manufacturer’s recommendations for maintenance and, if necessary, clean or replace the injectors in order to avoid increasing Chrysler’s fuel consumption and maintain optimal vehicle performance.

PARTICULATE FILTER
The particulate filter (FAF) is an important component of modern vehicles equipped with an internal combustion engine. Its role is to filter out the fine particles released by the engine and keep them in the filter to reduce pollutant emissions.

When the FAP gets clogged, it can also cause an increase in Chrysler’s fuel consumption. This is because FAP clogging can lead to lower air flow in the engine, which can increase Chrysler’s fuel consumption. In addition, pollution can also cause a decrease in power and an increase in pollutant emissions.

It is difficult to give an accurate estimate of the increase in Chrysler fuel consumption caused by a clogged particulate filter (FAF), as it depends on several factors such as the degree of clogging of the filter, type of driving, car model, etc.

However, in general, an increase in fuel consumption in the range of 5-10% can be observed when the FAP is clogged. This increase in consumption may be gradual and may worsen over time if the FAP is not cleaned or replaced.

Therefore, it is important to regularly monitor the condition of his FAP and, if necessary, clean or replace it to prevent any increase in Chrysler’s fuel consumption and ensure the smooth operation of his car.

POORLY MAINTAINED AIR CONDITIONER :
Using an air conditioner in your car can also have a significant impact on Chrysler’s fuel consumption if it is not properly maintained.

In general, using an air conditioner can increase Chrysler’s fuel consumption by about 5-20%, depending on the outside temperature, humidity, and vehicle speed. However, if the air conditioner is in poor condition, this increase may be more significant.

Poor maintenance of the air conditioner can lead to accumulation of dirt and dust in the air conditioning system, which can clog filters and ducts, increasing air flow resistance. This can reduce the efficiency of the air conditioning, which can lead to an increase in Chrysler’s fuel consumption.

In addition, insufficient refrigerant levels in the air conditioning system can also lead to increased Chrysler fuel consumption, as the air conditioner compressor must work harder to maintain a constant temperature inside the car.

Therefore, it is important to follow the manufacturer’s recommendations for air conditioner maintenance, in particular, to regularly clean the filters and check the refrigerant level in order to maintain optimal fuel consumption.

CLOGGED FILTERS :
Air filters and fuel filters should be cleaned or replaced regularly to ensure efficient combustion of fuel and optimal filtration of air entering the engine. This is because dirty filters can reduce the flow of air and fuel to the engine, which can lead to increased Chrysler fuel consumption.

On the other hand, the cabin filter can also lead to increased Chrysler fuel consumption if clogged. Although the impact on consumption is usually less than for a dirty air filter.

The cabin filter is responsible for filtering the air entering the car interior, and if it is clogged, this can lead to a decrease in air consumption, which can disrupt the operation of the air conditioning and heating systems. This can increase the workload of the air conditioning or heating system, which in turn can increase the fuel consumption of the Chrysler.

In general, an increase in Chrysler fuel consumption in the range of 1 to 5% can be observed when the cabin filter is clogged, depending on how long it has been clogged and how badly it is clogged.

Therefore, it is important to follow the manufacturer’s recommendations for maintenance and, if necessary, replace the cabin filter in order to maintain optimal fuel consumption and avoid overloading the air conditioning or heating system. It is recommended to regularly check the condition of the cabin filter and replace it before it becomes completely clogged to avoid an increase in Chrysler fuel consumption.

OIL FILTER
Used and contaminated engine oil can lead to increased friction between engine parts, which can increase Chrysler’s fuel consumption. Therefore, it is important to follow the manufacturer’s recommendations for oil change and engine oil change at recommended intervals.

In addition, it is recommended to use high-quality lubricants. This is because high-quality lubricants can reduce friction between engine parts and improve combustion efficiency, which can help save fuel.

INSUFFICIENTLY INFLATED TIRES :
Insufficiently inflated tires increase rolling resistance, which can increase Chrysler’s fuel consumption. It is important to check the tire pressure regularly and keep it at the level recommended by the manufacturer.

Eco-friendly driving is a way to drive a car in a way that reduces Chrysler’s fuel consumption and CO2 emissions. It is about adopting more flexible and proactive driving, using the car’s equipment efficiently and avoiding sudden accelerations, excessive braking and high speeds.

Here are some tips on how to practice eco-friendly driving. :

1.Anticipate driving situations: Looking far ahead, you can anticipate braking and acceleration and thus avoid sudden brake and accelerator depressions.
2.Drive at a reasonable speed: Moderate speed allows you to consume less fuel and also reduces the chance of accidents.
3.Use the car’s equipment efficiently: by using the gear ratios correctly, you can save fuel. For example, by quickly shifting into high gear, you can reduce the fuel consumption of the Chrysler.
4.Avoid sudden acceleration and excessive braking : This can lead to excessive Chrysler fuel consumption and premature brake wear.
5.Keep your car in good condition: Regular vehicle maintenance helps to keep the equipment in good condition and ensure maximum fuel efficiency.

By practicing eco-friendly driving, you can reduce Chrysler’s fuel consumption by 15-20%. In addition to reducing fuel costs, eco-friendly driving also helps to reduce CO2 emissions and preserve the environment.

CHRYSLER. Reducir el consumo de combustible Chrysler