CHEVROLET FUEL ACTIVATOR — a device which is installed on a fuel hose of any Chevrolet car and significantly reduces fuel consumption Chevrolet by 20% and improves the engine performance.
Therefore, with the same amount of fuel on your Chevrolet, you will drive MORE KILOMETERS!
Activators on CHEVROLET fully pay off in 3-4 months!
The service life of Activators for CHEVROLET is 10-15 years.
Activators are installed on all models of Chevrolet and are used in all types of fuel — GAS, PETROL, DIESEL FUEL.
The activators are easy to install, they are installed on the Chevrolet fuel supply hose in a few minutes:
1. Chevrolet fuel consumption is reduced by 20%.
2. A slight increase in the power of the Chevrolet engine.
3. Extends the service life of the Chevrolet engine.
4. The content of carbon monoxide and other pollutants in Chevrolet exhaust gases is reduced by 30-40%.
5. Stable and dynamic operation of the Chevrolet engine.
6. Reduces the formation of soot and carbon deposits on Chevrolet pistons, cylinders, spark plugs, fuel injectors, catalyst and exhaust pipes.
7. Extends the service life of the Chevrolet catalyst, lambda probe, spark plugs and Chevrolet fuel injectors.
Chevrolet ACTIVATOR reduces fuel consumption by 20%.
At the same time, the engine operation of Chevrolet is significantly improved.
Examples of installation on different models of Chevrolet.
Click on the photos, to enlarge
ANY FUEL (petrol, diesel, gas), by going through 10 magnetic fields of THESE ACTIVATORS, for a short time changes its structure and properties, and it BURNS more fully and REGULARLY.
Due to this, the Chevrolet engine begins to work much BETTER.
Usually, it is already seen after 10-20 km of run of the car Chevrolet which has an installed Activator.
Imagine, how your Chevrolet engine works with VERY GOOD FUEL.
That is, we have quite different (better) fuel.
You agree that chopped firewood burns much better than whole logs … The same thing happens with automotive fuel in the cylinders of the Chevrolet engine.
Activators installed on Chevrolet reduce the density and viscosity of fuel:
1. This leads to the formation of smaller fuel particles, ensures good atomization and combustion in the cylinders of the Chevrolet engine.
2. The fuel ignites better and burns smoothly, ensuring soft and smokeless operation of the Chevrolet engine.
3. Reduces deposits on injectors and carbon deposits on candles and Chevrolet cylinders.
4. Reduces the load on the operation of Chevrolet fuel supply systems.
5. Increases reliability and increases the life of Chevrolet fuel equipment.
All this leads to improved conditions for fuel combustion in Chevrolet cylinders.
FUEL with Activators burns more completely in the Chevrolet engine, does not leave carbon deposits on pistons, cylinders and spark plugs.
On Chevrolet diesel cars, the injectors are not polluted, and there is no black smoke even at throttling at free running.
Knowing where the fuel hoses are located, Activators at Chevrolet are installed within 5 minutes (see «INSTALLATION»)
ATTENTION! The main difference of THESE ACTIVATORS is that there are 20 magnets placed in them, which for a short time CHANGE THE STRUCTURE AND PROPERTIES OF FUEL. In other similar Aktivators which can be used on Chevrolet, there are only 2 powerful magnets which are not able to change anything in the fuel (see «ANALOGUES» ).
When you don’t like the Aktivators, then with no doubt you can return them back within 37 days (read «RETURN»).
ACTIVATOR reduces the fuel consumption of any CHEVROLET vehicle by 20%. Therefore, with the same amount of fuel on your Chevrolet, you will drive MORE KILOMETERS!
The operating life is at least 15 years
We produce and sell them starting from 2008
PRICE:
The set of Activators (2 Activators) — 60,00 EUR
The price includes the deliver by post.
NOVELTY
When installing on Chevrolet both the Fuel combustion Activators and Activator Autothermia, FUEL CONSUMPTION is reduced by 30-40%!
Read «ACTIVATOR OF AUTOTHERMIE»
PATENTS
The fuel consumption of Chevrolet cars depends on the model and engine.
Cruze I (2009-2012):
1.4 AT (140 hp) — 9 l/100 km in the city, 5.7 l/100 km in the mixed cycle;
1.6 AT (109 hp) — 11.2 l/100 km in the city, 8.3 l/100 km in the mixed cycle;
1.6 AT (113 hp) — 9 l/100 km in the city, 6.8 l/100 km in the mixed cycle;
1.8 AT (141 hp) — 11.3 l/100 km in the city, 7.8 l/100 km in the mixed cycle.
Aveo:
1.6 L, 115 hp, petrol, automatic transmission, front—wheel drive — 7.1 l/100 km;
1.4 L, 100 hp, petrol, manual transmission, front-wheel drive — 5.3 l/100 km;
1.2 l, 86 hp, petrol, manual transmission, front—wheel drive — 5.5 l/100 km.
Tahoe:
2.7 AT (303 hp) 4WD — 12.1 l/100 km in the mixed cycle;
3.0d AT (282 hp) — 11.2 l/100 km in the city, 8.4 l/100 km on the highway, 9.8 l/100 km in the mixed cycle;
6.2 AT (426 hp) 4WD — 17.1 l/100 km in the city, 9.9 l/100 km on the highway, 12.6 l/100 km in the mixed cycle.
Lacetti (I generation, 1.6 MT SE, 109 hp):
mixed cycle — 7.8 liters/100 km;
urban cycle — 10.1 liters/100 km;
country cycle — 6.4 liters/100 km.
Captiva 2.4 (2006):
urban cycle — 12.64 l/100 km;
country cycle — 7.25 liters/100 km;
mixed cycle — 9.27 liters/100 km.
The fuel consumption of Chevrolet cars depends on the driving mode. It may differ for different models in urban, rural, and mixed cycles.
Urban cycle
Examples of urban fuel consumption for some Chevrolet models:
Cruze:
1.8 AT (141 hp) — 11.3 l/100 km;
1.8 MT (141 hp) — 9.3 liters/100 km.
Aveo:
with automatic transmission — 10-12 liters/100 km (in traffic jams), 8.3–10.5 liters/100 km (without traffic jams).
Country cycle
Examples of fuel consumption in the country cycle for some Chevrolet models:
Niva:
8.4 liters/100 km.
Aveo:
with automatic transmission — 5.5–7.5 liters /100 km (at a speed of 70-120 km/ h), 5.3–7.1 liters/100 km (at a speed of 70 km/h).
Mixed cycle
Examples of fuel consumption in a mixed cycle for some Chevrolet models:
Cruze:
1.4 AT (153 hp) — 7.8 l/100 km;
1.6 CDTi AT (137 hp) — 7.6 liters/100 km.
Aveo:
with automatic transmission — 6.6–7.2 liters/100 km.
It is important to keep in mind that the actual fuel consumption may differ from that stated by the manufacturer due to driving style, speed, and other factors.
How to maximize the fuel efficiency of Your Chevrolet
In today’s world, fuel efficiency is an important factor for drivers who care about the environment and want to save fuel. here’s how to get the most out of your Chevrolet car. Whether you are driving a small car, a heavy truck or an SUV, we will provide you with information about various Chevrolet models so that you can effectively improve the fuel efficiency of your vehicle.
As you explore the world of fuel efficiency, you will come across a variety of information articles, including lists, manuals, checklists, frequently asked questions, training articles, expert advice, comparisons, myths and facts, and glossaries. On these resources you will find important information on economical driving, tips on vehicle maintenance and information on the latest fuel-saving technologies. With this knowledge, you will be better prepared to improve fuel efficiency and have a positive impact on your wallet and the environment.
Are you ready to improve the fuel efficiency of your consumption? Applying these fuel-saving measures and following the tips will help you get the most out of your Chevrolet and enjoy more fuel-efficient driving.
Maximize the fuel efficiency of your Chevrolet
1. Learn how to save fuel while driving
One of the most effective ways to improve fuel efficiency is to learn how to drive wisely. By simply changing your driving style, you can significantly reduce fuel consumption and increase fuel consumption.
— Accelerate smoothly and gradually: if you accelerate strongly, more fuel will be consumed; instead, press the accelerator pedal lightly so that your car gradually gains momentum.
— Maintain constant speed: Driving at a constant speed reduces the load on the engine and improves fuel efficiency. Use cruise control to maintain a steady pace when driving on the highway.
— Predict traffic and road conditions: Plan your route in advance and be aware of upcoming traffic lights, stop signs and turns. By anticipating such situations, you can make the necessary adjustments in advance and reduce the need for sudden stops or sudden accelerations.
— Avoid excessive idling: if the car is idle for a long time, fuel will be consumed. During long stops, turn off the engine or, if available, use the start-stop technology.
2. Keep the Chevrolet in good condition
Regular vehicle maintenance plays a crucial role in improving fuel efficiency. By keeping your Chevrolet in optimal condition, you can ensure smooth operation and reduce fuel consumption.
— Regular oil change: Follow the Chevrolet recommended oil change intervals to keep the engine well lubricated and running efficiently.
— Tire maintenance: Check the tire pressure regularly, because insufficient tire pressure can reduce fuel efficiency. Periodically change the position of the tires and make sure that they are adjusted to avoid uneven wear.
— Replace the air filters: A clogged air filter reduces engine power and fuel efficiency. To maintain optimal airflow in the engine, replace the air filter according to the schedule recommended by Consumption Chevrolet.
— Preventive maintenance: Regular inspections help to detect and fix minor problems before they develop into serious problems. Regular inspections will help to keep the overall condition of your consumption in order and improve fuel efficiency.
3. Take advantage of Chevrolet’s fuel-saving technology
Chevrolet cars are equipped with various fuel-saving technologies designed to optimize performance and reduce fuel consumption. To maximize the fuel efficiency of your vehicle, familiarize yourself with these features and use them effectively.
Active Fuel Consumption Management System (AFM): Chevrolet’s AFM system shuts down certain cylinders during low-load trips, which effectively saves fuel. Make sure that the engine of your car is equipped with the latest software to take full advantage of the AFM system.
— Auto-stop-start technology: This function automatically shuts off the engine when the vehicle comes to a complete stop and starts it again immediately when you release the brake pedal. By eliminating idling at stops, this technology significantly improves fuel efficiency in urban traffic.
Regenerative braking: The regenerative braking system, available for electric and hybrid models of consumption, captures the energy normally lost during braking and converts it into usable electricity, thereby extending the range of the vehicle and improving overall efficiency.
4. Optimize the aerodynamics and weight of your car
The aerodynamics and weight of a car play an important role in determining its fuel efficiency. Reduction of air resistance and huts
Fuel efficiency is a must for every driver. Since it determines the money you can save, the range of your car and the long-term performance of your vehicle. Demanding drivers know that choosing fuel-efficient cars like can not only maximize their fuel consumption, but also enjoy quality and top performance.
Common problems with different Chevrolet models
Chevrolet Cruze
Hard gearshift, jerks, “lagging”: some owners complain that the transmission is not working very smoothly.
Slow acceleration or “tight” turbocharging: there may be problems with the turbocharger or control electronics.
Reports of blind spots when switching and “jerking” the engine.
Chevrolet Equinox
Increased oil consumption — especially in some Equinox generations (for example, 2005, 2007, 2013-2016), owners note that the oil “goes out” faster than it should.
Electrical glitches: sometimes problems with electronics, sensors, or control systems.
Water leaks — complaints about seals, accumulation of water in the cabin due to poor seals or windows.
Chevrolet Malibu
Transmission problems: Jerking, “shock” shifting, especially on older models.
Oil consumption, especially on turbocharged engines (for example, 1.5 L turbo).
Electronics: screen sticking, problems with the rear-view camera and other systems.
Mechanical problems, such as cracked intake manifold gaskets, or wear on suspension parts.
Chevrolet Colorado
Problems with the air conditioner — some complain that the stove fan (blower) is not working correctly or is breaking down.
Gearshift delays, steering problems (in some cases, loss of power steering).
There may be water leaks or other minor mechanical problems.
Chevrolet Silverado (pickups)
For V8 engines (for example, 6.2 L L87) — NHTSA investigation: complaints about bearing wear, possible engine failures.
Transmission complaints (especially for some generations): shock switches, delays, or breakdowns.
Common complaints about build quality, noise, and electronics problems.
Chevrolet Impala
Transmission problems: jerks, noises, crashes, especially on older models.
Power supply and control units: problems with locks, door mechanisms.
Electrical systems: There are many problems with electrical equipment, from battery charging to wiring and sensors.
Braking system: in a number of models, there are complaints about brakes, pedals, and hydraulic circuitry.
Corrosion or assembly: according to some reviews, the quality of interior materials can be “cheap”, the finish is not very durable.
Recent risks and reviews
In 2025, GM recalled almost 600,000 vehicles (including Chevrolet Silverado, Suburban, Tahoe) due to the risk of engine failure (bearings, connecting rods).
Some owners of the latest models complain about the long unavailability of spare parts or problems due to factory assembly: “From the factory … the OnStar module and front camera were not working … the battery is completely discharged … there are no replacement batteries available …”
After-sales service: Some Silverado owners have significant warranty issues or delays in the delivery of spare parts: “The valve body … took a crap … They had to replace the transmission … because … part was still on backorder.”
How to minimize the risks of purchase / operation
When buying a used Chevrolet, pay special attention to the service history: whether there were oil changes, gearboxes, and bearing checks.
Perform regular maintenance: oil change, transmission fluid check, electrical system diagnostics.
Check if there are any open recollections for a specific model and year.
When choosing a model, it is important to study the owners’ reviews and independent reliability ratings.
Typical Causes of increased Chevrolet Fuel Consumption
Problems with sensors and injection system
An incorrectly functioning mass air flow sensor (DMRV) or oxygen sensor can lead to errors in the fuel-air mixture → fuel overruns.
Clogged or damaged injectors can also “splash out” excess fuel, especially when feeding, which impairs efficiency.
Thermostat / Engine warm-up issues
In some cases, for example, in the Chevy Aveo, the cause of increased fuel consumption may be an incorrectly operating thermostat: the engine does not warm up to operating temperature, and the ECU “increases” the fuel supply.
With frequent short trips (urban mode), heating may be insufficient, which leads to a richer mixture and higher consumption.
Malfunction of the ignition system and spark plugs
Poor spark plugs or high resistance can lead to inefficient fuel burning → fuel consumption increases.
Problems with grounding, ignition modules, or poor sparking may also play a role.
Fuel leaks or malfunctions in the fuel system
There may be problems with the fuel pump, fuel pressure regulator, or backflow, especially in old/worn-out systems.
Leaks (although this is a rarer scenario) — both mechanical and related to defective connections — can lead to fuel loss.
Software / electronic issues
The engine ECU may “incorrectly” regulate the mixture, especially with non-standard firmware (for example, after chip tuning) or malfunctions of the control unit.
Active fuel economy systems (in some Chevrolet engines) may not work optimally, which increases fuel consumption. For example, in engines with “active cylinder management” (AFM/DOD), efficiency losses may occur during transitions between modes. > “oil seeping … into the cylinders … when the engine goes back into v8 mode … causes issues over time”
Driving style
Aggressive driving (sudden acceleration, braking) greatly increases fuel consumption.
Frequent short trips (especially cold start) → the engine does not reach the optimal temperature for a long time.
Maintenance and wear
A clogged air filter, dirty or old spark plugs, worn—out engine or fuel system components can all impair fuel economy.
Engine wear or compression (over time) can lead to less efficient combustion.
Problems with on-board computer readings
It happens that the “fuel consumption” displayed by the on—board computer is not entirely accurate. For example, the Trax owner complained that the actual consumption (calculated manually) was very different from the on-board readings.
Reddit
Calibration of sensors, errors in readings — all this can “distort” the data.
Examples of Chevrolet models with complaints
Chevrolet Cruze
On Cruze owners’ forums, there are complaints about consumption of ~17 liters/100 km in summer and ~21 liters in winter for some cars.
Chevrolet Aveo
For some Aveos (especially older generations), consumption is claimed to be up to ~14 liters/100 km — possible reasons: sensors, thermostat, injectors.
Chevrolet Malibu
There are reports from owners that the expense in certain cases is “twice as much as stated»: for example, on Reddit:
Chevrolet Spark
The owner of the Spark 2010 complained about the consumption of ~ 10 liters / 100 km, which is higher than that of similar models: possible causes are bad nozzles, bad candles.
How to diagnose and eliminate increased consumption
Perform a full diagnostic of sensors (DMRV, oxygen), check for errors through the OBD scanner.
Check the fuel system: fuel pressure, injectors, leaks.
Check the thermostat and cooling system to make sure that the engine is warming up normally.
Do maintenance: replace spark plugs, air filter, clean injectors if necessary.
Follow the driving style: avoid sudden accelerations, often drive at normal engine temperature.
Check if there are any non-standard “chip firmware” or ECU modifications that could worsen consumption.
If there is an active cylinder shut-off mechanism (AFM/DOD), check if it is working correctly.