VOLVO. Reduce the fuel consumption of Volvo

VOLVO FUEL ACTIVATOR — a device which is installed on a fuel hose of any Volvo car and significantly reduces fuel consumption Volvo by 20% and improves the engine performance. Therefore, with the same amount of fuel on your Volvo, you will drive MORE KILOMETERS!

Volvo fuel consumption

Activators are installed on all models of Volvo and are used in all types of fuel — GAS, PETROL, DIESEL FUEL.

The Activators are easy to install, they are installed on the Volvo fuel supply hose in a few minutes:

1. Volvo fuel consumption is reduced by 20%.
2. A slight increase in the power of the Volvo engine.
3. Extends the service life of the Volvo engine.
4. The content of carbon monoxide and other pollutants in Volvo exhaust gases is reduced by 30-40%.
5. Stable and dynamic operation of the Volvo engine.
6. Reduces the formation of soot and carbon deposits on Volvo pistons, cylinders, spark plugs, fuel injectors, catalyst and exhaust pipes.
7. Extends the service life of the Volvo catalyst, lambda probe, spark plugs and Volvo fuel injectors.

Volvo ACTIVATOR reduces fuel consumption by 20%.

At the same time, the engine operation of Volvo is significantly improved.

Examples of installation on different models of Volvo.

Click on the photos, to enlarge

ANY FUEL (petrol, diesel, gas), by going through 10 magnetic fields of THESE ACTIVATORS, for a short time changes its structure and properties, and it BURNS more fully and REGULARLY.
Due to this, the Volvo engine begins to work much BETTER.

Usually, it is already seen after 10-20 km of run of the car Volvo which has an installed Activator.

Imagine, how your Volvo engine works with VERY GOOD FUEL
That is, we have quite different (better) fuel.

     You agree that chopped firewood burns much better than whole logs … The same thing happens with automotive fuel in the cylinders of the Volvo engine.

fuel economy

car fuel economy

Activators installed on Volvo reduce the density and viscosity of fuel:

1. This leads to the formation of smaller fuel particles, ensures good atomization and combustion in the cylinders of the Volvo engine.
2. The fuel ignites better and burns smoothly, ensuring soft and smokeless operation of the Volvo engine.
3. Reduces deposits on injectors and carbon deposits on candles and Volvo cylinders.
4. Reduces the load on the operation of Volvo fuel supply systems.
5. Increases reliability and increases the life of Volvo fuel equipment.

All this leads to improved conditions for fuel combustion in Volvo cylinders.

    FUEL with Activators burns more completely in the Volvo engine, does not leave carbon deposits on pistons, cylinders and spark plugs.

     On Volvo cars, the injectors are not polluted, and there is no black smoke even at throttling at free running.

Knowing where the fuel hoses are located, Activators at Volvo are installed within 5 minutes (see «INSTALLATION»)

     ATTENTION! The main difference of THESE ACTIVATORS is that there are 20 magnets placed in them, which for a short time CHANGE THE STRUCTURE AND PROPERTIES OF FUEL.    In other similar Aktivators which can be used on Volvo, there are only 2 powerful magnets which are not able to change anything in the fuel (see «ANALOGUES» ).

     When you don’t like the Aktivators, then with no doubt you can return them back within 37 days (read «RETURN»).

ACTIVATOR reduces the fuel consumption of any VOLVO vehicle by 20%. Therefore, with the same amount of fuel on your Volvo, you will drive MORE KILOMETERS!

The operating life is at least 15 years
We produce and sell them starting from 2008

PRICE:

The set of Activators (2 Activators) — 60,00 EUR

The price includes the deliver by post.

NOVELTY

When installing on Volvo both the Fuel combustion Activators and Activator Autothermia, FUEL CONSUMPTION is reduced by 30-40%!

Read «ACTIVATOR OF AUTOTHERMIE»

PATENTS
(click on the image, to enlarge it)

Reasons for increased fuel consumption Volvo S70, 850, V70I, C70I

In this article I will try to collect all the reasons why I noticed an increased Volvo fuel consumption. In my case, we will be talking about the 2.5 liter atmospheric engine (B5254S), which was installed on volvo 850th and 70th series cars. Figures on consumption, respectively, I will give on this motor. But on other 5-cylinder engines, these figures should be approximately the same. Consumption in the city is about 13.5 liters. On the highway at a speed of 100 kmh — 7.5-8 liters. At a speed of 140 kmh — 10 liters.

Candles and Volvo fuel consumption

Original volvo candles for atmospheric engines The Volvo community has proven in practice — the best candles that can be installed on a Volvo motor are original! For atmospheric engines, they are 3-electrode, for turbocharged — with one electrode. You should not buy into advertisements for more expensive candles, which supposedly increase power, increase economy, ignite the fuel mixture better — they will not work better than the original ones, but rather, even vice versa. I noticed that with the passage of time using the candle, its efficiency decreases, so I recommend changing the candles every 2-3 years to maintain maximum ignition efficiency of the fuel mixture, even if the candles are in good condition externally and there are no problems with ignition.

The effect of the lambda probe, aka the oxygen sensor on Volvo fuel consumption

In most of our Volvo, two lambda probes are installed: one before the catalyst, the other after. Unlike the first, the second oxygen sensor does not affect the motor in any way. Many people are mistaken that, allegedly, the failure of the catalyst or its removal, as well as the breakdown of the second oxygen sensor somehow affects the operation of the engine. This is a misconception. The second oxygen sensor does not affect the regulation of the proportions of the mixture in any way. A failed catalyst can be safely removed by installing a flame extinguisher or simply a direct current instead. In order not to get an error about the low efficiency of the catalyst after that, it is necessary to install a decoy in the form of a spacer for the second lambda.

Now we will talk about the first lambda probe, which is installed BEFORE the catalyst. Here it is, just has a direct impact on Volvo’s fuel consumption. By analyzing the amount of oxygen in the exhaust, the engine control unit regulates the Volvo fuel supply to achieve maximum efficiency. It happens that, over time, the lambda probe deteriorates. At the same time, it still transmits data to the control unit in the desired range (from 0 to 1 volt), but due to an incorrectly occurring chemical reaction on the sensor, it does so with a delay. At the same time, the engine control unit does not issue any errors, since it «sees» the lambda and «sees» the data from it in the desired range. But due to the fact that these data are incorrect, Volvo often heavily overflows fuel, over-enriches the mixture. As a result, Volvo’s fuel consumption increases by 20-30% percent, and the computer does not issue any errors. Often, such a lambda death can be caused by low-quality Volvo fuel or fuel «charged» with various additives, which is now sold at gas stations of almost all brands. If your Volvo fuel consumption has greatly increased, while there are no mistakes, and no other guesses have justified themselves, then it makes sense to replace the first lambda probe with a new one. You can safely put a universal Boshevsky, worth about 50-60 dollars.

Intake air intake affects Volvo fuel consumption

One of the common reasons for increasing Volvo fuel consumption on any engine, including Volvo, is intake air intake. At the same time, depending on the size of the suction and its location (before or after the throttle), the error may light up or appear at all. The main reason is that the air enters the combustion chamber bypassing the air flow sensor, and because of this, the engine control unit incorrectly calculates the percentage of fuel and air. Due to air suction, other problems may arise, for example, unstable engine operation at idle. If the air intake is insignificant, then the error may not light up and Volvo’s fuel consumption will also be increased slightly, by 5-10%. If the suction is significant, then the control unit will issue a corresponding error about the impossibility of correctly adjusting the percentage of Volvo fuel and air in the mixture. It is worth monitoring the condition of the intake manifold and throttle gaskets and using only original gaskets. When assembling and disassembling the intake elements, it is always necessary to put all the pipes and vacuum hoses very carefully and tightly, and always clamp them with clamps, preventing air from being sucked out of the atmosphere after the air flow sensor.

Fuel injectors affect Volvo fuel consumption

Another reason for the increase in Volvo fuel consumption and the loss of engine power are contaminated injectors. Over time, despite the presence of a fuel filter, the fuel injectors that provide Volvo fuel injection into the mixture begin to work incorrectly. Due to contamination of needle valves, they can reduce their throughput, or, more often, change the nature of spraying. The main function of the nozzle is to ensure that the Volvo fuel is sprayed into a fine dispersion so that the fuel molecules are evenly mixed with the air. In this case, effective combustion of the mixture will occur. But, due to pollution, the injectors begin to spray fuel less efficiently, or even in general, pour a «jet». In this case, part of the Volvo fuel does not have time to burn and the engine power drops, and the Volvo fuel consumption increases. So keep an eye on the condition of the injectors. At a special stand, you can check how much Volvo fuel the nozzle passes and what shape its jet has.

The effect of the mass air flow sensor on Volvo fuel consumption

In addition to the fact that the mass air flow sensor may fail (then the computer will definitely give an error), it may eventually become covered with microscopic dust. Because of this, he does not lose performance, but begins to exaggerate the Volvo fuel consumption readings. not significantly, but 10 percent is easy! In order to clean it, it is necessary to use only special liquids. The carburetor cleaner may damage the sensor! For example, I will tell you that the air consumption at idle speed before cleaning the sensor, my computer showed about 4.00 g / l, and after cleaning with a special liquid, it began to show 3.5-3.6. As a result, Volvo’s fuel consumption decreased significantly along the highway, especially at high speeds of about 130-150 kmh, Volvo’s fuel consumption did not exceed 10 liters, and at a speed of 100 kmh it generally stopped around 7.5 liters per 100 kilometers.

These are the most common reasons for increased Volvo fuel consumption, which have to be observed on Volvo engines
Now I will tell you what has been done to normalize Volvo’s fuel consumption.

1. The throttle valve has been cleaned. It was even stuck with dirt and stuck at high speeds. From her car stalled at traffic lights. And she reacted badly to the gas pedal. After cleaning, Volvo’s fuel consumption dropped to about 15-16 liters in the city.

2. Next, the 1st lambda probe was replaced by denso. Volvo’s fuel consumption dropped to 15 liters. I didn’t notice any special changes in the movement of the machine. But the feeling of a more correct operation of the internal combustion engine was still felt. But I was still dissatisfied with Volvo’s fuel consumption. According to the passport , there should be 13.2 liters in the city .

3. After that, I decided to sort out everything that could somehow affect Volvo’s fuel consumption. Namely: wheel pumping, longer warm-up, change in air density, yes, the density of autumn air, as well as the operation of the stove and additional electrical equipment. Taking all this into account, you can reduce Volvo’s fuel consumption by only about 0.1 — 0.2 liters.

P.s. At the same time, inflated wheels make your suspension even tougher. And Volvo’s fuel economy on the stove in the fall, or in winter, will not give you anything but a cold.

4. After reviewing a ton of information about Volvo’s fuel consumption on the Internet, it was decided to clean the DMRV. And here it is! After cleaning, the car became faster, smoother and Volvo’s fuel consumption crept down. And now it is equal to 13.6 in the city, despite the fact that there are no traffic jams and you can sometimes press the gas. With traffic jams, Volvo’s fuel consumption is approximately 14.2. At an average speed of 20 km/h. But this is according to the on-board computer, in fact, Volvo’s fuel consumption is less. Because the bortovik writes everything, including warmups.

5. The next step will be the replacement of the fuel filter and candles. (Candles are only original). And I plan to study the effect of oil density on Volvo fuel consumption.

The average fuel consumption of Volvo is indicated, taking into account the unloaded weight, and the factory wheels (R16).

The high demand for Volvo fuel consumption is primarily due to the fact that experts from Sweden, engaged in the Assembly and development of new models of this car, adhere exclusively to the highest standards of quality in their work. As a result, as they say, the result on the face.

  No matter what model would be discussed, Volvo fuel consumption s60 or some other, all those who know firsthand this brand of car, especially note the high degree of reliability of the vehicle. Moreover, the Volvo xc60, like other representatives of the brand, are among the recognized world leaders in terms of reliability and safety. Probably for this reason, Volvo fuel consumption often choose couples with young children.

  However, a high level of security is not the only advantage of Volvo fuel consumption. Both volvo s 60 and other models have an elegant and aesthetic design and are easy to operate. In addition, Volvo fuel consumption cars are quite saturated in terms of technical equipment. All of the above taken together provides each owner of the car of this brand the maximum level of comfort.

  Some refuse to purchase foreign cars (even such quality as the Volvo xc60), mistakenly believing that there may be some problems with the purchase of spare parts. In fact, spare parts for Volvo fuel consumption can be purchased in almost any Russian city, and their cost is quite moderate. There are usually no problems with the service and maintenance of the vehicle. Therefore, if you want to buy a good car that will last you for a long period of time, to make a choice in favor of Volvo would be the right decision, which later will not have to regret in any case. The most important thing is to buy a car, as well as spare parts for it, from the official dealers of the manufacturer.

Buying Volvo fuel consumption in any other outlets, you can not be sure that you are dealing with a quality product. Choosing Volvo, you choose the best that the modern car market has to offer.

  Experts recommend, if possible, to repair Volvo fuel consumption cars in special service centers, which will be able to pick up all the necessary Volvo parts.

  The most popular car services are currently services that are related to the maintenance of Volvo cars, namely: repair and diagnosis of the Volvo fuel consumption engine, and quite often it is necessary to repair the chassis of the Volvo car. However, with timely diagnosis of the Volvo chassis, its life cycle can be significantly extended.

  The main problem for the Volvo fuel consumption chassis is the poor condition of our roads, and Volvo steering suffers from the use of poor quality gasoline, which spoils the Volvo fuel system, and with prolonged use of low-quality oil leads to non-repairable Volvo engine failure.
  The presence of problems in the ignition Volvo could lead to problems with the launch of the Volvo fuel consumption. In this regard, it is necessary to check the Volvo spark plugs in a timely and regular manner and to monitor the serviceability of Volvo high-voltage wires.

  Due to improper operation of the diesel engine Volvo, and inappropriate or untimely change of camshaft belt Volvo may cause cracks in the head. If there are cracks in the head of the Volvo fuel consumption unit, it will be necessary to replace it, and if there is significant damage and complete repair of the entire Volvo fuel consumption power unit.

  All modern fuel injected Volvo engines require the use of only high-quality fuels. Volvo fuel consumption injectors may become clogged when using low quality fuel. Additionally, all the injectors require cleaning once a year or after driving 35000 – 40000 km Also should carefully monitor the condition of fuel filter Volvo, it is impossible to prevent its clogging.

  Moreover, the use of low-quality fuel can cause damage to the Volvo carburetor. In case of poor performance of Volvo filters, there is a mandatory clogging of Volvo fuel consumption carburetor chambers, in connection with which there may be a need to replace certain parts of the Volvo fuel consumption carburetor. Periodic Volvo diagnostics is also required for the most familiar Volvo car unit, its Volvo steering power steering. Care must be taken to ensure that the fluid level does not fall below the required level, otherwise considerable effort will be required to drive the car on its Volvo steering wheel.

Next, let us review the basic and common disease of the Volvo fuel consumption

Disadvantages of Volvo fuel consumption

Volvo fuel consumption steering rack.

  Problems with the steering rack Volvo fuel consumption may appear after a run of 100 thousand km. to Determine its malfunction can be felt and the most obvious symptom – the characteristic knock. It manifests itself when riding over a rough road and intensifies when turning the steering wheel of the Volvo. Also, turning the steering wheel becomes tight in one or both directions, it is possible to vibration or incorrect return to the starting position. There may be a rumble in the Volvo power steering. You should look at the presence of oil stains under the standing Volvo car. A leak from the steering rack is also a sign of its failure. Therefore, it is necessary to make a trial run Volvo before buying and indirectly determine the condition of the steering rack. If you can hear and feel the above signs, the best way is to drive a Volvo fuel consumption.

Volvo fuel consumption exhaust gas recirculation valve.

  Exhaust gas recirculation (EGR) makes Volvo’s engine efficient and reduces Volvo’s fuel consumption. If the valve of this system is faulty and dirty, during the Volvo test drive at low speeds, there will be jerks and dips, as well as a loss of Volvo power. Therefore, work on cleaning or in General on removal of the valve of games though not strongly expensive, but attention should be paid to this nuance.

Volvo fuel consumption Electrician.

  One of the weak points of this Volvo fuel consumption car is the electrician. All Volvo systems must be thoroughly tested during the purchase process. Most often brings Volvo audio system, Volvo motor cooling fans. Volvo climate control and trunk lid may not work properly. Problems with electronics include more serious problems, such as the failure of Volvo knee and camshaft position sensors. In this case, the Volvo engine in General can stop suddenly and no longer start, and at best, greatly increase the fuel consumption of Volvo and there will be twitching when overclocking Volvo fuel consumption. Since they are responsible for what kind of cylinder Volvo ignite the mixture.

Volvo fuel consumption camshaft chain.

Volvo drive in this car belt type, and the camshafts are connected by a chain. Its wear and tear, stretching on used Volvo cars-a frequent phenomenon. You can find out about it at idle Volvo fuel consumption engine ringing sound. Late replacement of a worn Volvo chain can lead to serious problems and money costs.

Volvo fuel consumption wheel bearings.

Wheel bearings in Volvo can wear out after a mileage of 50 thousand kilometers to Learn about this will help test drive a Volvo with the purchase. When problems with wheel bearings Volvo fuel consumption car body begins to vibrate, there is an unpleasant sound, amplifying when you turn the wheel Volvo. This check also does not take much time, but will save money.

The yoke lever in the gear box Volvo fuel consumption.

With careful attitude to the gearbox there are no problems, but when you run more than 100 thousand kilometers in the gearbox Volvo can wobble wheel lever Volvo. Resource in the gearbox Volvo is also not unlimited and with a large mileage Volvo should carefully see how it works at different speeds. The wear of the gearbox is determined by the impacts in the Volvo transmission, the jerks when switching and the loss of transmission Volvo. Repairs to the Volvo fuel consumption gearbox can be a waste.

Volvo fuel consumption starter Bendix.

  Another equally common problem may be in Volvo is the starter Bendix. It can also be called Volvo’s disease. Typically, when a failure of the Bendix starter hums but turning shaft of the engine of the Volvo fuel consumption does not occur. In the case of buying Volvo is not superfluous to ask when the Bendix was replaced.

VOLVO. Reducir el consumo de combustible Volvo 

قليل استهلاك فولفو للوقود Volvo